有齿轮曳引机漏油对电梯安全运行的危害
The Harm for Oil Leak of Gear Traction Machine to Safe Operation of Elevator
摘要
目前使用年限在10年以上的电梯大部分仍使用有齿轮曳引机,这类电梯已处于使用寿命的中后期,运行故障率偏高,事故风险较高。笔者结合日常检验的实际情况,发现这类电梯的一个突出问题是曳引机漏油。漏油将间接导致电梯曳引能力不足或者制动力矩不足,若不加以重视必将增加事故隐患,可能导致电梯安全事故,因此需要给予重点监控。
出处
《中国电梯》
2016年第1期43-44,共2页
China Elevator
参考文献5
-
1GB/588--2003,电梯制造与安装安全规范[S].
-
2颜朝友.浅析曳引机漏油对电梯曳引能力的影响[J].机电技术,2009,32(3):103-104. 被引量:1
-
3毛怀新.电梯与自动扶梯技术检验[M].北京:学苑出版社,2000.
-
4邓文.对曳引式电梯制动器安全性能的检验探讨[J].商品与质量(学术观察),2012(7):255-255. 被引量:2
-
5尚顺事,顾家琳,康飞宇,蒋东雷.影响薄膜润滑摩擦系数的主要因素[J].石油炼制与化工,2004,35(10):41-44. 被引量:16
二级参考文献11
-
1尚顺事,顾家琳,康飞宇,蒋东雷.影响薄膜润滑摩擦系数的主要因素[J].石油炼制与化工,2004,35(10):41-44. 被引量:16
-
2雒建斌,严崇年.润滑理论中的模糊观[J].润滑与密封,1989,14(4):1-4. 被引量:11
-
3雒建斌,温诗铸.薄膜润滑特性和机理研究[J].中国科学(A辑),1996,26(9):811-819. 被引量:4
-
4Johnston G, Jwayte R, Spikes H A. The measurement and study of very thin lubricant films in concentrated contacts.Trib Trans, 1991(34): 187-194
-
5Tichy J A. Modeling of thin film lubrication. Stle Trib Trans,1995,38(1) :108-118
-
6Gangteng G, Spikes H A. The control of fiction by molecular fractionation of base fluids mixtures at metal surface. Stle Trib Trans, 1997(40) :461-469
-
7Hu Y Z, Wang H, Guo Y, et al. Simulation of lubricant rtheology in thin film lubrication, part Ⅱ: simulation of couette flow. Wear, 1996,196:249-253
-
8Hu Y Z, Wang H, Guo Y, et al. Simulation of lubricant rtheology in thin film lubrication, part Ⅰ: simulation of poiseuille flow. Wear, 1996,196:243-248
-
9Smeeth M, Spikes H A, Gunsel S. The formation of viscous surface films by polymer solutions: boundary or elastohydrodynamic lubrication. Trib Trans, 1996,39(3): 720-725
-
10GB 7588-2003,电梯制造与安装安全规范[S].
共引文献30
-
1李国宾,关德林,魏海军,田建明.汽缸套—活塞环磨合过程摩擦力矩分形行为研究[J].辽宁工程技术大学学报(自然科学版),2005,24(z2):182-184. 被引量:1
-
2姚泽华,沈功田.电梯无损检测技术[J].无损检测,2006,28(6):310-313. 被引量:13
-
3乔丰立,卢堃,李桂花.水介质液压泵锥形轴配流副轴承间隙的计算[J].液压气动与密封,2007,27(4):32-35. 被引量:5
-
4罗永前.不同润滑状态摩擦力矩分形行为研究[J].内燃机,2007,23(4):9-11.
-
5李国宾,关德林,李廷举.刷镀电压对镍镀层摩擦磨损性能的影响[J].大连海事大学学报,2009,35(3):90-93. 被引量:1
-
6颜朝友.浅析曳引机漏油对电梯曳引能力的影响[J].机电技术,2009,32(3):103-104. 被引量:1
-
7陈旻.浅析自动扶梯及自动人行道中的“剪切”危险[J].机电技术,2009,32(4):104-104. 被引量:2
-
8陈兆芳.基于FPGA的电梯控制系统[J].福建电脑,2010,26(2):164-164. 被引量:4
-
9梁飞.论电梯检验技术[J].现代企业文化,2010(12):195-196.
-
10段俊杰,张德坤.润滑状态下球-盘点接触摩擦副的低速轻载滑滚特性研究[J].摩擦学学报,2010,30(5):431-436. 被引量:4
-
1路俊秀,王秀江,郭瑞素.曳引电梯制动力矩的确定[J].电梯工业,2016,17(6):78-80. 被引量:2
-
2施育峰.一起电梯事故案例的分析与思考[J].装备制造技术,2017(1):180-182. 被引量:2
-
3李永亮.电梯检验带来的思考[J].劳动保护,2013(1):100-101. 被引量:1
-
4耿晟.深圳一大厦电梯事故引发的思考[J].价值工程,2014,33(15):77-78. 被引量:1
-
5潘树伟,谢叶柯.一种自动扶梯载荷控制系统的构想[J].中国电梯,2012,23(19):37-38.
-
6莫仕沛.作用于轿厢和对重的上行超速保护装置的比较[J].中国电梯,2010(17):27-32.
-
7袁德文.自动扶梯和自动人行道制动力矩的计算[J].中国电梯,2013(23):14-15.
-
8詹光源.一种自动扶梯制动距离的计算方法[J].中国电梯,2013(13):17-19.
-
9李鹏,李筱.降低MA40断路器的运行故障率[J].经济视野,2014(6). 被引量:1
-
10路俊秀,邓伟.探讨GB7588-2003有关曳引电梯的制动问题[J].中国电梯,2010(19):48-50. 被引量:1