期刊文献+

利用自然低温的风力机结冰风洞实验系统设计 被引量:9

Design of wind tunnel experiment system for wind turbine icing by using natural low temperature
下载PDF
导出
摘要 为研究风力机叶片的结冰特性与防除冰方法,设计了一种简便、低成本的结冰风洞实验系统。利用北方冬季的自然低温条件,将常规的开口射流风洞加以改造,安装水雾喷射系统和结冰测试段以提供结冰环境条件。在冬季进行了结冰验证实验,对结冰风洞的3个主要参数:温度稳定性、液态水含量和过冷水滴平均直径进行了测试和标定。结果表明,在环境温度相对稳定的冬季时间段内,主要指标可在一定程度上满足风力机结冰实验要求。 A simple and low cost icing wind tunnel experiment system has been designed in order to study the characteristics of wind turbine blade icing and de-icing methods.The conventional open jet wind tunnel has been transformed by using the natural low temperature condition of the northern winter,and a water spray system and the icing test section were installed to provide the icing conditions.The verification experiments were carried out in winter,and the three main parameters:the temperature stability,the liquid water content and the medium volume droplet diameter were tested and calibrated.The results show that the main indexes can meet the requirements of the wind turbine icing test to a certain degree at the relatively stable environment temperature.
出处 《实验流体力学》 CAS CSCD 北大核心 2016年第2期54-58,66,共6页 Journal of Experiments in Fluid Mechanics
基金 国家自然科学基金(51576037)
关键词 结冰风洞 风力机 自然低温 温度 液态水含量 水滴直径 icing wind tunnel wind turbine natural low temperature temperature Liquid Water Content(LWC) Medium Volume Diameter(MVD)
  • 相关文献

参考文献11

  • 1何玉林,李俊,董明洪,刘军,金鑫.冰载对风力机性能影响的研究[J].太阳能学报,2012,33(9):1490-1496. 被引量:20
  • 2朱程香,王珑,孙志国,付斌,朱春玲.风力机叶片翼型的结冰数值模拟研究[J].空气动力学学报,2011,29(4):522-528. 被引量:41
  • 3Wang X. Convective heat transfer and experimental icing aerodynamics of wind turbine blades[D]. Maniboba: Department of Mechanical and Manufacturing Engineering of University of Manitoba,2008.
  • 4Frohboese P, Anders A. Effects of icing on wind turbine fatigue load[J]. Journal Physics: Conference Series,2007,(75): 0120361.
  • 5孙少华,徐洪雷,符鹏程,蔡继峰.叶片覆冰对风电机组的影响[J].风能,2014(9):100-103. 被引量:15
  • 6Shin J, Bond T. Results of an icing test on a NACA 0012 airfoil in the NASA Lewis Icing Research Tunnel[R]. NASA TM-105374,1992.
  • 7Shin J, Bond T. Experimental and computational ice shapes and resulting drag increase for a NACA0012 airfoil[R]. NASA TM-105743,1992.
  • 8Vecchione L, De Matteis P, Leone G. An overview of the CIRA icing wind tunnel[R]. AIAA-2003-0900, 2003.
  • 9邢玉明, 盛强, 常士楠.大型开式冰风洞的模拟技术研究[C]//大型飞机关键技术高层论坛暨中国航空学会2007年学术年会论文集, 深圳:2007:1-10.
  • 10易贤,桂业伟,肖春华,黄志祥.结冰风洞液态水含量测量方法研究[J].科技导报,2009,27(21):86-90. 被引量:9

二级参考文献32

  • 1朱国林,M.Kronast.用二维N-S方程计算汽车流场的地面效应(英文)[J].空气动力学学报,1993,11(1):22-32. 被引量:22
  • 2张佃国,郭学良,付丹红,李宏宇.2003年8~9月北京及周边地区云系微物理飞机探测研究[J].大气科学,2007,31(4):596-610. 被引量:54
  • 3FORTIN G and PERRON J. Wind turbine icing and de-icing [ R]. AIAA 2009 -274, 2009.
  • 4MATI'HEW C HOMOI,A, MUHAMMAD S VIRK, TOMAS WALLENIUS, etc. Effect of atmospheric temperature and droplet size variation on ice accretion of wind turbine blades [J]. Wind Energy, 2010, 98(12) :724 -729.
  • 5HOMOLA M C, WALLENIUS T, MAKKONEN L, NICK- LASSON P, SUNDSBo P A. The relationship between chord length and rime icing on wind turbines [ J ]. Wind Energy, 2010,13(7) :627 -632.
  • 6VIRK M S, HOMOLA M C, NICKLASSON P J. Effect of rime ice accretion on aerodynamic characteristics of wind tur- bine blade profiles [ J ]. Wind Engineering , 2010,34 (2) : 207 -218.
  • 7DUNCAN T, LEBLANC M, MORGAN C, LANDBERG L.Understanding icing losses and risk of ice throw at operating wind farms[J]. Winterwind,2008,31(2) :263 -270.
  • 8CHUNG, JAMES, BEEHORST, ANDREW, CHOO, YUNG, POTAPCZUK, MARK and SLATER, JOHN. Navier-Stokes a- nalysis of flowfield characteristics of an ice-contaminated air- craft wing[R]. AIAA-1999 -0375.
  • 9SHIM, JEONGHWAN, CHUNG, JUNE, and LEE, KI D.A comparison of turbulence modeling in flow analysis of iced airfoils[ R]. AIAA 2000 - 3920, January 2000.
  • 10RICHARD E KREEGER, WILLIAM B WRIGHT. The influ- ence of viscous effects on ice accretion prediction and airfoil performance predictions[ R]. AIAA -2005 - 1373.

共引文献79

同被引文献62

引证文献9

二级引证文献35

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部