摘要
随着脉冲调制的射频脉冲技术的广泛应用,对脉冲包络信号的准确测量需要许多参数进行表征。因此,本文首先分析了脉冲包络信号各个参数的定义。然后,从数学角度分析了基于IEEE直方图法的脉冲幅值的计算以及基于最小二乘法的脉冲顶部拟合直线的计算。最后,将各个脉冲测量参数的计算应用于峰值功率分析仪测量仪器中。实践结果表明,本次设计可以快速、准确地获得脉冲包络信号的测量参数值,可广泛应用于数字通信、导航。
With the wide application of pulse modulated RF pulse technology, accurate measurement of pulse envelope signal requires many parameters to characterize. Therefore, this paper firstly analyzes the definition of the pulse envelope signal. Then, from a mathematical point of view, analyzes the calculation of the pulse amplitude based on the IEEE histogram method and the calculation of the top fitting line based on the least square method. Finally, the calculation of the measurement parameters of the pulse is applied to the peak power analyzer. The practical results show that the design can obtain the measurement parameters of the pulse envelope signal quickly and accurately, and can be widely used in digital communication, navigation, radar and other systems.
出处
《仪器仪表标准化与计量》
2016年第2期33-35,共3页
Instrument Standardization & Metrology