面向3D打印的三维模型处理技术研究综述

A review of 3D model process technology oriented to 3D printing

作为一种变革性的技术,3D打印将推动三维智能数字化制造,而面向3D打印的三维模型数据处理则是实现这一过程的基础和前提。针对面向3D打印的三维模型处理技术,首先给出了3D模型数据处理的技术体系;然后分析总结了3D模型数据处理各个关键技术环节的研究现状;最后对面向3D打印的3D数据处理技术存在的问题及未来发展方向进行了展望。3D模型数据处理技术为3D打印贯穿产品全生命周期提供技术支持,可有效推动3D打印技术的发展和完善。

3D printing technology as a revolution has been a strong impetus to the development of 3D intelligent digital mamlfacturing, and the 3D model data process technology for 3D printing is the basis and premise of this process. The architecture of 3D model data process technology was firstly given. Then, the re- search statuses on key technologies of data process were summarized. Finally, some challenges and the future directions were indicated. 3D model data process will support the development and improvement of 3D printing which will be applied throughout the product lifecycle.