真空辅助艇体成型工艺系统的可靠性分析

Reliability Analysis of the Vacuum Assisted Resin Infusion Process System for the Yacht Hull

为了提高艇体成型质量的可靠性,以真空辅助树脂艇体成型工艺系统为研究对象。通过分析系统故障形式,得到工艺环节与系统之间的逻辑关系,再利用蒙特卡洛法对系统进行可靠性仿真分析,获得系统可靠性指标及可靠性曲线。该方法得到的结论为游艇生产过程的质量控制提供参考依据。

In observation of improving the reliability of hull shape quality,the vacuum assisted resin infusion process system was taken as a reference for empirical studies. A logic relationship between the process and the system was firstly determined via the analysis of the system failure form. The reliability index of the system and the reliability curve were then obtained by employing Monte Carlo method. It shows that the result from the presented method can be used as a reference for the quality control of yacht production process.