摘要
为满足机载系统的需要,给出了共形相控阵天线的分析和设计过程,同时研制了一种高度仅为0.14波长的准八木天线单元。利用三维电磁仿真软件HFSS对天线单元和共形相控阵进行了仿真设计,并研制了一套L频段共形相控阵天线。该天线由天线阵面、波束形成网络和波控器等构成。天线阵面由4个天线单元组成,共形安装在机头上。经实际测试,共形相控阵天线阵面的和波束在扫描范围内增益大于10 d Bi,并具有较低的副瓣电平;差波束零深小于-20 d B。
To meet the requirement of an airborne system,the analysis and design process of a conformal phased array antenna is presented,and also the quasi-yagi antenna unit,the height of which is nearly 0. 14 wavelengths is designed. The software HFSS is used to simulate the antenna unit and conformal phased ar-ray. An L-band conformal phased array antenna is developed,which consists of array antenna,beamforming network and beam controller. Array antenna is realized by 4 antenna units,which is mounted on the confor-mal structure of plane’ s nose. The test results of the conformal phased array antenna show that the gain of sum beam >10 dBi in all scanning range,meanwhile the low side lobe is achieved,and null depth of differ-ence beam <-20 dB.
出处
《电讯技术》
北大核心
2016年第6期692-696,共5页
Telecommunication Engineering
关键词
机载天线
L频段
共形相控阵
准八木天线
airborne antenna
L-band
conformal phased array
quasi-yagi antenna