期刊文献+

Deformation Behavior of Fe-36Ni Steel during Cryogenic( 123-173 K) Rolling 被引量:4

Deformation Behavior of Fe-36Ni Steel during Cryogenic( 123-173 K) Rolling
原文传递
导出
摘要 Microstructural evolution and mechanical properties of cryogenic rolled Fe-36Ni steel were investigated. The annealed Fe-36Ni steel was rolled at cryogenic temperature( 123-173 K) with 20%- 90% rolling reduction in thickness.The deformation process was accompanied by twinning at cryogenic temperature,and the mean thickness of deformation twins was about 200 nm with 20% rolling reduction. When the rolling reduction was above 40%,twinning was suppressed due to the stress concentration in the tested steel. Deformation microstructure of Fe-36Ni steel consisted of both twin boundaries and dislocations by cryogenic rolling( CR),while it only contained dislocations after rolling at room temperature( RT). The tensile strength of Fe-36Ni steel was improved to 930 MPa after 90% reduction at cryogenic temperature,while the tensile strength after 90% reduction at RT was only 760 MPa. More dislocations could be produced as the nucleation sites of recrystallization during CR process. Microstructural evolution and mechanical properties of cryogenic rolled Fe-36Ni steel were investigated. The annealed Fe-36Ni steel was rolled at cryogenic temperature( 123-173 K) with 20%- 90% rolling reduction in thickness.The deformation process was accompanied by twinning at cryogenic temperature,and the mean thickness of deformation twins was about 200 nm with 20% rolling reduction. When the rolling reduction was above 40%,twinning was suppressed due to the stress concentration in the tested steel. Deformation microstructure of Fe-36Ni steel consisted of both twin boundaries and dislocations by cryogenic rolling( CR),while it only contained dislocations after rolling at room temperature( RT). The tensile strength of Fe-36Ni steel was improved to 930 MPa after 90% reduction at cryogenic temperature,while the tensile strength after 90% reduction at RT was only 760 MPa. More dislocations could be produced as the nucleation sites of recrystallization during CR process.
出处 《Journal of Iron and Steel Research(International)》 SCIE EI CAS CSCD 2016年第5期447-452,共6页 钢铁研究学报(英文版)
基金 Item Sponsored by Research Fund for the Central Universities of China(N130607002) National Natural Science Foundation of China(51174057,51274062) Research Fund for the Doctoral Program of Higher Education of China(20130042110040)
关键词 Fe-36Ni steel cryogenic rolling twinning dislocation slip room temperature deformation microstructure Fe-36Ni steel cryogenic rolling twinning dislocation slip room temperature deformation microstructure
  • 相关文献

参考文献30

  • 1M. Shiga, Curr. ()pin. Solid State Mater. Sci. 1 (1996) 340- 348.
  • 2B. K. Jasthi, W.J. Arbegast, S. M. Howard, J. Mater. Eng. Per form. 18 (2009) 925-934.
  • 3C. E. Guillaume, Nature 1832 (1904) 134 -139.
  • 4A. A. Tseng, J. Miiller, Y. H. Hahn, Mater. Des. 17 (1996) 89 96.
  • 5T. Nishikawa, Y. Takaki, M. Sanai, S. Kitamura, K. Naka ma, T. Kariya, SEI Technical Review 71 (2010) 94-97.
  • 6S. P. Woong, M. S. Chun, M, S. Hart, M. H. Kim, .!. M. Lee, Mater. Sci. Eng. A 528 (2011) 5790- 5803.
  • 7A. Gulyaev, E. L. Svistunova, Seripta Mater. 35 (1996) 501-504.
  • 8S. Zaefferer, T. Baudin, R. Penelle, Acta Mater. 49 (2901) 1105- 1122.
  • 9A. Vinogradov, S. Hashimoto, V. I. Kopylov, Mater. Sci. Eng. A 355 (2003) 277 -285.
  • 10K. Tirsatine, H. Azzeddine, T. Baudin, A.L. Helbert, F. Brisset, B. Alili, D. Bradai, J. Alloys Comp. 610 (2014) 352 360.

同被引文献20

引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部