期刊文献+

Physical properties of WSTi3515S burn-resistant titanium alloy 被引量:5

Physical properties of WSTi3515S burn-resistant titanium alloy
原文传递
导出
摘要 Development of burn-resistant titanium alloys is the most direct way of mitigating the ignition and propagation of titanium fires in jet engines. WSTi3515S alloy(Ti–35V–15Cr–0.3Si–0.1C) is a new high alloying beta type burn-resistant titanium alloy, belonging to Ti–V–Cr type alloys which have been made significant progress in engineering technology in the past 5 years. The physical properties of WSTi3515S burn-resistant titanium alloy such as the elastic properties and thermal properties were measured and analyzed in different conditions. The results show that both the Young's modulus and shear modulus of WSTi3515S alloy decrease slightly with the temperature increasing at the tested temperature range. The Poisson's ratio of WSTi3515S alloy is around 0.36. However, the thermal properties such as the specific heat, thermal diffusivity, thermal conductivity and thermal expansion increase with the temperature increasing, which results from the strengthening of lattice heat vibration at elevated temperature. And the room temperature density of WSTi3515S alloy is 5.295 gácm^(-3). Development of burn-resistant titanium alloys is the most direct way of mitigating the ignition and propagation of titanium fires in jet engines. WSTi3515S alloy(Ti–35V–15Cr–0.3Si–0.1C) is a new high alloying beta type burn-resistant titanium alloy, belonging to Ti–V–Cr type alloys which have been made significant progress in engineering technology in the past 5 years. The physical properties of WSTi3515S burn-resistant titanium alloy such as the elastic properties and thermal properties were measured and analyzed in different conditions. The results show that both the Young's modulus and shear modulus of WSTi3515S alloy decrease slightly with the temperature increasing at the tested temperature range. The Poisson's ratio of WSTi3515S alloy is around 0.36. However, the thermal properties such as the specific heat, thermal diffusivity, thermal conductivity and thermal expansion increase with the temperature increasing, which results from the strengthening of lattice heat vibration at elevated temperature. And the room temperature density of WSTi3515S alloy is 5.295 gácm^(-3).
出处 《Rare Metals》 SCIE EI CAS CSCD 2016年第5期361-366,共6页 稀有金属(英文版)
基金 financially supported by the International Science and Technology Cooperation Program of China (No. ISTCP 2013DFR50090) the National Natural Science Foundation of China (No. 51504037) the Special Fund for Basic Scientific Research of Central Colleges,Chang’an University (No. 2014G1311088)
关键词 Physical properties WSTi3515S alloy Extrusion Burn-resistant Physical properties WSTi3515S alloy Extrusion Burn-resistant
  • 相关文献

参考文献6

二级参考文献47

  • 1赵永庆,周廉,邓炬.阻燃钛合金的阻燃模型[J].材料科学与工程学报,2000,20(z2):888-891. 被引量:2
  • 2赵永庆,赵香苗,朱康英,罗国珍,周廉.阻燃钛合金[J].稀有金属材料与工程,1996,25(5):1-6. 被引量:43
  • 3辛社伟,赵永庆.关于钛合金热处理和析出相的讨论[J].金属热处理,2006,31(9):39-42. 被引量:62
  • 4Zhao Yongqing, Zhou Lian, Deng Ju. Mater Sci Eng A[J], 1999, A267:167
  • 5Zhao Yongqing, Zhou Lian. Journal of Materials Science and Technology[J], 2001, (6): 677
  • 6Zhao Yongqing, Zhou Lian. Acta Metallurgic Sinica[J], 2001, 1 : 406
  • 7Zhao Y Q, Qu H L, Zhu K Yet al. Journal of Alloys and Compounds[J], 2002, 333:165
  • 8Zhao Y Q, Qu H L, Zhu K Yet al. Journal of Materials Science[J], 2003, 38:1579
  • 9Zhu K Y, Zhao Y Q, Qu H Let al. Journal of Materials Science[J], 2004, 39:2387
  • 10Li Y G, Blenkinsop P A, Loretto M H et al. Act Mater[J], 1999, 47 (10): 2889

共引文献56

同被引文献38

引证文献5

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部