摘要
采用端铣加工方法加工渐开线齿轮,运用UG软件对某大模数齿轮轴进行刀具轨迹仿真,并通过数据转换将齿轮和刀具模型导入动力学仿真软件ADAMS中。在ADAMS中建立刀具齿轮铣削系统仿真模型,对端铣刀粗加工切削过程进行动力学分析,得到刀具和工件的位移、速度及加速度变化曲线以及主轴转速和进给速度对切削加工及振动影响的变化规律,为实现端铣齿轮加工技术的实际应用提供参考。
Using end milling processing method in processing involute gear,and using the UG software to conduct the tool path simulation of the large module gear- shaft,through the data conversion put the gear and tool model into the kinematics simulation software ADAMS. Using the ADAMS software to establish the simulation model of tool gear milling system,and to dynamic analyze the cutting process of end milling cutter,and then get the displacement,velocity and acceleration curve of the tool and the work- piece,and understand the change rule of spindle speed and feed speed on the cutting work,and provide a reference and contrast for the practice of the end milling gears.
出处
《工具技术》
北大核心
2016年第6期63-66,共4页
Tool Engineering
基金
辽宁省科技厅资助项目(201303004)
关键词
齿轮
端铣
动力学
仿真
gear
end milling
dynamics
simulation
