期刊文献+

浅析广电网络IPv6化进程中过渡技术的选择 被引量:4

Analysis of IPv6 Transition Technologies Selection on CATV Network
下载PDF
导出
摘要 从目前比较成熟的主流过渡技术原理入手,综合分析并对比了不同过渡技术的适用范围、工作机制、技术优势和存在问题;分别基于有线电视网络的主干网、接入网进行过渡场景分析,并对不同场景下采取的过渡技术方案进行推荐;最后归纳并提炼广电网络向IPv6过渡的整体过渡实施策略。 This paper analyzes current mature IPv6 transition technologies' principles, applicabilities, mechanisms and problems. Also it analyzes transition cases of backbone network and access network and recommends suitable IPv6 transition technologies. Finally ,it summarizes the overall strategy on the CATV network transition process.
出处 《广播与电视技术》 2016年第6期88-95,共8页 Radio & TV Broadcast Engineering
基金 "基于IPv6的网络端到端关键技术研究与跨网IPv6试验(一期)"资助
关键词 过渡技术 IPV6 有线电视网络 Transition technology, IPv6, CATV Network
  • 相关文献

参考文献4

二级参考文献87

  • 1Jim Bound,Yanick Pouffary,Tim Chown et al.IPv6 Enterprise Network Analysis[Z].IETF Draft draft-ietf-v6ops-ent-analysis-00.txt.
  • 2Lind M,Ksinant V,Park S,et al.Scenarios and Analysis for Introducing IPv6 into ISP Networks[S].IETF RFC 4029,Mar 2005.
  • 3Nordmark E,Gilligan R.E.Basic Transition Mechanisms for IPv6 Hosts and Routers[S].IETF RFC 4213 October 2005.
  • 4Carpenter B,et al.Connection of IPv6 Domains via IPv4 Clouds[S].RFC 3056.
  • 5Savola P,Patel C.Security Considerations for 6to4[S].IETF RFC3964,December 2004.
  • 6Templin F,Gleeson T,Talwar M,Thaler D.Intra-Site Automatic Tunnel Addressing Protocol(ISATAP)[S].IETF RFC 4214 Oct,2005
  • 7Carpenter B,Jung C.Transmission of IPv6 over IPv4 Domains without Explicit Tunnels[S].RFC2529,March 1999.
  • 8Huitema C.Teredo:Tunneling IPv6 over UDP through NATs[Z].IETF draft,draft-huitema-v6ops-teredo-05.txt,April,2005.
  • 9Liu Min,Wu Xian-guo et al.Tunneling IPv6 with private IPv4 addresses through NAT devices[Z].IETF draft,《draft-liumin-v6ops-silkroad-01.txt》,May,2004.
  • 10Cisco Press.IPv6 Deployment Strategies[EB/OL].www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/ipv6 sol/ipv6dswp.pdf

共引文献81

同被引文献9

引证文献4

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部