基于Pro/E二次开发的光纤线包参数化设计

The Overview of Optic Fiber Cable Package Parametric Design based on the Secondary Development of Pro/E

由于几何参数不同的光纤线包结构相似,所以在设计过程中会造成不必要的重复劳动,设计周期较长,成本高,而且设计过程中出现错误的概率比较大,可能使相同的问题反复出现。这不仅导致人力资源的浪费,而且制造的零件存在不能装配等一系列后续问题,该类问题的存在,严重阻碍了新产品的研究与开发。基于Pro/E二次开发可以解决上述问题,为光纤线包的设计提供了软件支持,并为光纤线包后续的有限元分析奠定了基础。

Due to the different geometric parameters of optic fiber cable package structure similar,designing through different designers will cause unnecessary duplication of labor,long design cycle,high cost,and the larger probability of error,probably the same problem recurring.It causes not only the waste of manpower and resources,but also the existence of manufactured parts cannot be assembling and a series of follow-up problems.These problems will cause great resistance to the research and development of new products.The above problems can be solved by the secondary development of Pro/E.It will provide software support for the design of the optical fiber cable package,and lay the foundation for the subsequent finite element analysis of the fiber optic cable package.