期刊文献+

剂量电离室数字滤波器设计 被引量:1

Design of Digital Filter Based on Dose Monitor
下载PDF
导出
摘要 为满足上海先进质子治疗装置治疗头中剂量电离室电子学A/D转换后的数据率和降噪要求,提出一种多级级联的数字滤波器结构。本文中设计LMS自适应滤波器来滤除50 Hz的工频噪音,相比于传统数字陷波器,不会对有用信号造成损失。通过MATLAB软件仿真对信号处理结果表明,电子学延时减少到170μs,数据率50 kHz,基本符合量化后的剂量数据处理要求。 In order to reduce the data rate and noise after the A / D converter in the electronic system of beam flux ionization chambers,this paper designs a implementation scheme of poly- stage- decimation filter. Compared with traditional digital band- stop filter,LMS adaptive filter is used to eliminate the interference of 50 Hz. The benefit of this is to cause no loss of the useful signal. The theoretical simulation with MATLAB show that the delay time of electronic system is reduced to 170 microsecond,at the same time,the data rate is 50 kHz.
出处 《核电子学与探测技术》 CAS 北大核心 2016年第1期26-29,共4页 Nuclear Electronics & Detection Technology
关键词 电离室电子学 数字滤波器 多级级联 electronic system of ionization chamber digital filter cascade
  • 相关文献

参考文献2

  • 1杨小牛,楼才义,徐建良.软件无线电原理与应用[M].北京:电子工业出版社,2004.
  • 2杜勇,路建功,李元洲.数字滤波器的Matlab与FPGA实现[M].北京:电子工业出版社,2012.

共引文献43

同被引文献3

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部