期刊文献+

微型环状反应器CaO催化剂涂层制备生物柴油研究 被引量:1

Study on Biodiesel Production in Micro-Circularity Reactor with CaO Catalyst Coating
下载PDF
导出
摘要 本研究调查了在微型环状反应器内使用Ca O催化剂涂层制备生物柴油的方法。实验使用厨余废油和甲醇为原料进行酯交换反应,Ca O负载γ-Al_2O_3非均相催化剂涂层以Fe-Cr-Al合金为载体。实验以醇油摩尔比1∶72对120~200℃的微型环状反应器温度范围和停留时间进行了实验。实验结果表明,当停留时间为2 h反应温度为180℃时得到最佳产率20%。 This research investigated the production of biodiesel in micro-circularity reactor using CaO catalyst coating. The experiments used waste cooking oil and methanol as raw material for the transesterification, and CaO load onγ-Al2O3 heterogeneous catalyst was put on Fe-Cr-AI alloy. The experiments were carried out in micro- circularity reactor at the reaction temperature in the range of 120℃ to 200℃, with an oil to methanol molar ratio of 1:72 and different resident time. Result showed that the best biodiesel production yield was 20 % when the resident time was 2 h and the reaction temperature was 180 ℃.
出处 《广东化工》 CAS 2016年第11期10-11,共2页 Guangdong Chemical Industry
基金 国家自然科学基金(21206091)
关键词 微型环状反应器 催化剂涂层 生物柴油 酯交换反应 micro- circularity reactor catalyst coating biodiesel transesterification
  • 相关文献

参考文献6

  • 1黄风洪,郭薪梅.生物柴油发展的现状和前景[J].中国石油化工科技指南,2006,30-34.
  • 2黄风洪,黄庆德.生物柴油制造技术[J].北京:化学工艺出版社.2009.
  • 3张照亮,马晓健.生物柴油反应器研究进展[J].油脂工程,2010:80-83.
  • 4Schubert K, Brandner J, Fichtner M, et al. Microstructure devices for applications in thermal and chemical process engineering[J]. Microscale ThermophysicalEngineering. 2001, 5(1): 17-39.
  • 5Schubert K, Bier W, Brandner J, Realization and resting ofmicrostructure reactors, micro heat exchangers and micromixers for industrial applications in chemical engineering [M]. American Institute of Chemical Engineers, 1998.
  • 6于新海,王正东,涂善东,马玉录.Cu/ZnO/Al_2O_3催化剂涂层工艺参数的优化[J].太阳能学报,2005,26(4):556-562. 被引量:2

二级参考文献18

  • 1Jeony Kwi Seong. Fuel economy and life-cycle cost analysis of a fuel cell hybrid vehicle[J].J power sources,2002,105:58-65.
  • 2Ogden Joan M. A comparison of hydrogen, methanol and gasoline as fuels for fuel cell vehicles: implications for vehicle design and infrastructure development [ J ]. J Power sources,1999,79:143 - 168.
  • 3Peters R. Investigation of methanol reformer concept considering the particular impact of dynamic and long-term stability for use in a fuel-cell-powered passenger car[ J] .J power sources,2000,86:507 - 514.
  • 4Wiese W, Emonts B, Peters R. Methanol stream reforming in a fuel cell drive systerm[ J ]. J power sources, 1999,84: 187 -193.
  • 5Shen Jian-Ping, Song Chunshan. Influnce of preparation method on performance of Cu/Zn-based catalysts for low-temperature steam reforming and oxidative steam reforming of methanol for H2 production for fuel cells[ J]. Catal today,2002,77:89 - 98.
  • 6Lindstrom Bard, Pettersson Lars J. Activity and characterization of Cu/Zn, Cu/Cr,and Cu/Zn on γ-Aluminia for methanol reforming for fuel cell vehicles[ J]. Appl catal A: general,2002,234:111 - 125.
  • 7Wegeng Robert S, Pederson Larry R. Compact fuel processors for fuel cell powered automobiles based on microchannel technonlogy[ J]. Fuel cell bulletin,28.
  • 8Matson Dean W, Martin Peter M.Fabrication of Microchannel Chemical Reactors [ A ]. 2nd international conference on microreaction technology[ C], 63 - 71.
  • 9Dudfield C D, Chen R. A carbon monoxide PRO X reactor for fuel cell automotive application [ J ]. Int J hydrogen energy,2001,26: 763 - 775.
  • 10Groppi G,Ibashi W, Valentini M.High-temperature combustion of CH4 over PdO/Al2O3: kinetic measurements in a structured annular reactor [ J ]. Chem eng sci, 2001,56: 831- 839.

共引文献1

同被引文献21

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部