期刊文献+

TMP残液中双三羟甲基丙烷回收过程研究

Recycling process of ditrimethylolpropane from TMP residue
下载PDF
导出
摘要 研究了用溶液结晶法从三羟甲基丙烷精馏重质残液中提取双三羟甲基丙烷的过程,并对溶解和结晶等关键操作单元进行了讨论,确定了最佳操作条件:原料与溶剂的质量比为1∶4~1∶5,溶解温度为(100~102)℃,结晶温度为(-1~1)℃,搅拌速率为(180~200)r/min。在此条件下,生产的双三羟甲基丙烷产品纯度达到97%以上,熔化温度达到110℃以上,满足工业产品质量要求。 The extraction of ditrimethy1 olpropane from the heavy distillation raffinate of trimethylolpropane is studied by using solution cryst-allization method. The key operations such as dissolution and crystallization,are discussed The optimal conditions are shown as follows: 1 ∶ 4- 1 ∶ 5 of the mass ratio of raw material and solvent,100-102℃ of dissolution temperature,- 1- 1℃ of crystallization temperature,180- 200 r / min of stirring rate. Under the optimal condition,the purity of obtained ditrimethylolpropane can reach above 97% and the melting temperature is above110℃,meeting the quality requirement for the industrial products.
出处 《现代化工》 CAS CSCD 北大核心 2016年第6期71-73,共3页 Modern Chemical Industry
关键词 双三羟甲基丙烷 三羟甲基丙烷 溶液结晶 ditrimethylolpropane trimethylolpropane solution cryst-allization
  • 相关文献

参考文献6

  • 1刘乃青,宋尚德.TMP和Di-TMP合成工艺进展[C].涂料用助剂论坛及应用技术交流会,2007:161-163.
  • 2Kuzuhara Ikutaro, Iwamoto Atsushi. Method for producing ditrimeth- ylolpropane : US, 1491521A1 [ P ]. 2009 - 12 - 29.
  • 3Malec R E. Synthetic lubricants: US, 3673226A [ P]. 1972 -06- 27.
  • 4王强,刘武平.双三羟甲基丙烷和/或三羟甲基丙烷甲缩醛生产工艺:CN,1911886A[P].2007-02-14.
  • 5Watanabe Toshio, Iwamato Atsushi, Watanabe Masashi ,et al. Method for producing ditrimethylolpropane : JP, 2003335717A [ P ]. 2003 - 11 -28.
  • 6Watanabe Toshio, Iwamato Atsushi, Watanabe Masashi,et al. Method for producing ditrimethylolpropane : JP, 2003335716A [ P ]. 2003 - 11 -28.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部