3Deleroi W. Broken bar in squirrel cage rotor of an induction motor, part 1: description by superimposed fault currents[J]. Archiv Ffir Elektrotechnik, 1984, 67: 91-99.
4Liu Zhenxing, Yin Xianggen, Zhang Zhe, et al. Online rotor mixed fault diagnosis way based on spectrum analysis of instantaneous power in squirrel cage induction motors[J]. IEEE Transactions on Energy Conversion, 2004, 19(3): 485-490.
5M'hamed Drif, Marques Cardoso A J. The use of the instantaneous-reactive-power signature analysis for rotor-cage-fault diagnostics in three-phase induction motors[J]. IEEE Transactions on Industrial Electronics, 2009, 56(11): 4606-490.
6M'hamed Drif, Marques Cardoso A J. Rotor cage fault diagnostics in three-phase induction motors, by the instantaneous phase-angle signature analysis[C]. The Proceedings of IEEE International Symposium on Industrial Electronics, 2007:1050-1055.
7M'hamed Drif, Marques Cardoso A J. The instantaneous power factor approach for rotor cage faults diagnosis in three-phase induction motors[C]. The Proceedings of International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2008: 173-178.
8Czeslaw T Kowalski, Waldemar Kanior. Effectiveness of the frequency analysis of the stator current in the rotor fault detection[C]. The Proceedings of IEEE International Conference on Industrial Technology, 2008: 1-5.
9Man6s F Cabanas, Francisco Pedrayes, Manuel G Melero, et al. Unambiguous detection of broken bars in asynchronous motors by means of a flux measurement-based procedure[J]. IEEE Transactions on Instrumentation and Measurement, 2011, 60(3): 891-899.
10Ahc6ne Bouzida, Omar Touhami, Rachid Ibtiouen, et al. Fault diagnosis in industrial induction machines through discrete wavelet transform[J]. IEEE Transactions on Industrial Electronics, 2011, 58(9): 4385-4395.
