摘要
在梯形成形算法理论基础上,利用模拟和实测核脉冲信号研究了梯形成形算法中衰减时间常数(τ_(trap))、达峰时间(n_a)与成形脉冲波形、滤波效果的关系,以及nb在分离堆积脉冲时的取值选择。研究表明,当且仅当τ_(trap)等于输入信号衰减时间常数时,成形脉冲对称;n_a值越大,滤波效果越好,脉冲宽度增加;n_b小于两个核脉冲信号发生的时间间隔时,采用梯形成形算法可分离堆积脉冲。
By using the simulated nuclear pulse signals and the measured ones,the relationship between the decay time constant of the algorithm(τ_(trap)) and the trapezoidal pulse shape was studied,and the peaking time of the trapezoidal pulse(n_a) was discussed with the filtering performance. Also,the law of n_b selection was produced for pile-up pulse separation. The results suggest that only the shaping parameter τ_(trap) equals to the decay time constant of input signal can the shaped pulse be symmetry. Besides,the filtering performs better as n_a increases and the pile-up pulse can be separated as long as the trapezoidal pulse width is less that the interval time of the two nuclear pulse signals.
出处
《核电子学与探测技术》
CAS
北大核心
2016年第2期150-153,158,共5页
Nuclear Electronics & Detection Technology
基金
国家自然科学基金(11475036
41404108)
国防重点实验室开放基金(RGET1201)资助
关键词
梯形成形
成形参数
达峰时间
堆积脉冲分离
trapezoidal pulse shaping
shaping parameters
peaking time
pile-up pulse separation