期刊文献+

相控阵超声检测聚焦法则对噪声影响的测试及分析

Test and Analysis of the Influence of the Phased Array Ultrasonic Testing Focal Law on the Noise
下载PDF
导出
摘要 相控阵的声场噪声要远远复杂于常规探头的噪声,为了合理的控制噪声,提高信噪比及检测灵敏度,就聚焦法则中接收和发射晶片的起始位置、分辨率值、折射角以及动态聚焦4个方面对检测噪声的影响进行了测试及分析。结果表明:接收和发射晶片的起始位置、折射角是影响噪声的主要因素;分辨率值不影响噪声的分布和水平,只影响图像的清晰度;动态聚焦不影响楔块或耦合产生的噪声水平或分布。 The phased array acoustic field noise is more complex than the conventional probe noise. In order to reasonably control the noise, improve the SNR and the detection sensitivity, the researcher tests and analyzes the influence of the four aspects, including the initial position of receiving and transmitting chip in the focal law,resolution value, refraction angle, and dynamic focusing, on noise testing. The results show that the initial position of receiving and transmitting chip and the refraction angle are the main factors affecting noise; resolution value does not affect the distribution and the level of noise, but affects only the image clarity; dynamic focusing does not affect the wedge block or coupling noise level and distribution.
作者 魏同锋
出处 《船舶职业教育》 2016年第3期46-49,共4页 Shipbuilding Vocational Education
关键词 聚焦法则 噪声 相控阵 focal law noise phased array
  • 相关文献

参考文献3

二级参考文献18

  • 1李衍.超声相控阵检测技术系列讲座(No.1)[J].无损探伤,2007,31(4).
  • 2李衍.超声相控阵检测技术系列讲座(No.2)[J].无损探伤,2007,31(6).
  • 3李衍.超声相控阵检测技术系列讲座(No.3)[J].无损探伤,2008,32(1).
  • 4李衍.超声相控阵检测技术系列讲座(No.4)[J].无损探伤,2008,32(4).
  • 5李衍.超声相控阵检测技术系列讲座(No.5)[J].无损探伤,2008,32(6).
  • 6Klautkramer J,Klautkramer H.Ultrasonic Testing of Materials[M].Springer-Verlag,fourth edition.Berling,1990.
  • 7Birring AS.Flaw Location Errors in Extruded Stainless Steel Pipes[J].Ultrasonics,1983,21(6):270-274.
  • 8Anmol S Birring.Selection of Phased Array Parameters for Weld Testing[J].Materials Evaluation,2008,66(9):931-934.
  • 9Anmol S.Birring.Ultrasonic Phased Array for Weld Testing[J].Materials Evaluation,2008,66(3):282-284.
  • 10强天鹏,徐卫,陈雁康,施健.管子-管板焊缝的射线照相无损检测技术[J].化工设备与管道,2008,45(6):12-14. 被引量:12

共引文献42

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部