期刊文献+

哈克密炼机三维流场的非等温数值模拟研究 被引量:2

下载PDF
导出
摘要 利用流体力学计算软件Fluent对69 cm^3哈克密炼机内的聚合物熔体进行了三维非等温非稳态数值模拟,得到三维流场的瞬时温度分布,并对熔体与密炼室之间的热量传递过程进行了分析。结果表明:当粘性耗散生热量等于向外传热量时,达到热平衡状态,熔体平均温度不再变化。由于聚合物熔体具有较高的粘性生热,仅靠自然对流不足以使密炼室壁保持初始的设定温度,壁温会有所增加。流场的混合指数分布说明混合流场中剪切流动占主导地位,还包括一小部分拉伸流动和收敛流动。
出处 《橡胶工业》 CAS 2016年第7期429-433,共5页 China Rubber Industry
基金 国家自然科学基金资助项目(51173016)
  • 相关文献

参考文献8

  • 1Li H X,Hu G H. A Two-Zone Melting Model for Polymer Blends ina Batch Mixer[J]. Polymer Engineering and Science,2001,41 (5) : 763-770.
  • 2Kim J K,White J L. Non-Newtonian and Nonisothermal Modeling of 3D-Flow in an Internal Mixer[J]. International Polymer Processing. 1991,6(2) : 103-110.
  • 3李国胜,徐玉兴,盖作有.370密炼机密炼室温度场分析[J].橡塑技术与装备,2007,33(11):1-10. 被引量:3
  • 4汪传生,张俊岭.密炼机同步转子的三维温度场分析[J].橡塑技术与装备,2008,34(5):1-7. 被引量:1
  • 5Bai Y, Sundararaj U. Nonisothermal Modeling of Heat Transfer Inside an Internal Batch Mixer[J]. American Institute of Chemical Engineers,2011,57 (10) : 2657-2669.
  • 6Manas-Zloczower I, Cheng H E Analysis of Efficiency in Polymer Processing Equipment[J]. Macromolecular Symposia, 1996,112 (1): 77-84.
  • 7Yang H H, Manas-Zloczower I. 3D Flow Field Analysis of a Banbury Mixer[J]. International Polymer Processing, 1992,7 (2) : 195 -203.
  • 8Li T, Manas-Zloczower 1. Flow Field Analysis of an Intermeshing Counter-Rotating Twin Screw Extruder[J]. Polymer Engineering and Science, 1994,34 (7) : 551-558.

二级参考文献2

  • 1[1]姚玉英.化工原理上册.天津科学技术出版社,1992,11.
  • 2[5]橡胶工业手册编写小组.橡胶工业手册第七分册.化学工业出版社,1982,11.

共引文献2

同被引文献15

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部