期刊文献+

Influence of oxide scales on the corrosion behaviors of B510L hot-rolled steel strips 被引量:2

Influence of oxide scales on the corrosion behaviors of B510L hot-rolled steel strips
下载PDF
导出
摘要 The influence of oxide scales on the corrosion behaviors of B510 L hot-rolled steel strips was investigated in this study. Focused ion beams and scanning electron microscopy were used to observe the morphologies of oxide scales on the surface and cross sections of the hot-rolled steel. Raman spectroscopy and X-ray diffraction were used for the phase analysis of the oxide scales and corrosion products. The corrosion potential and impedance were measured by anodic polarization and electrochemical impedance spectroscopy. According to the results, oxide scales on the hot-rolled strips mainly comprise iron and iron oxides. The correlation between mass gain and test time follows a power exponential rule in the damp-heat test. The corrosion products are found to be mainly composed of γ-Fe OOH, Fe3O4, ?-Fe OOH, and γ-Fe2O3. The contents of the corrosion products are different on the surfaces of the steels with and without oxide scales. The steel with oxide scales is found to show a higher corrosion resistance and lower corrosion rate. The influence of oxide scales on the corrosion behaviors of B510 L hot-rolled steel strips was investigated in this study. Focused ion beams and scanning electron microscopy were used to observe the morphologies of oxide scales on the surface and cross sections of the hot-rolled steel. Raman spectroscopy and X-ray diffraction were used for the phase analysis of the oxide scales and corrosion products. The corrosion potential and impedance were measured by anodic polarization and electrochemical impedance spectroscopy. According to the results, oxide scales on the hot-rolled strips mainly comprise iron and iron oxides. The correlation between mass gain and test time follows a power exponential rule in the damp-heat test. The corrosion products are found to be mainly composed of γ-Fe OOH, Fe3O4, ?-Fe OOH, and γ-Fe2O3. The contents of the corrosion products are different on the surfaces of the steels with and without oxide scales. The steel with oxide scales is found to show a higher corrosion resistance and lower corrosion rate.
出处 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2016年第7期769-778,共10页 矿物冶金与材料学报(英文版)
基金 supported by the National Natural Science Foundation of China(No.51222106) the Fundamental Research Funds for the Central Universities(No.FRF-TP-14-011C1) the Major State Basic Research Development Program of China(No.2014CB643300) the Beijing Municipal Commission of Education
关键词 热轧钢板 腐蚀行为 氧化膜 电子显微镜观察 Γ-FE2O3 氧化铁皮 腐蚀产物 X-射线衍射 strip steel hot rolling focused ion beams Raman spectroscopy oxide scale corrosion
  • 相关文献

参考文献1

二级参考文献3

共引文献7

同被引文献31

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部