300MW汽轮机卧式主汽门关闭不严密原因分析与处理
摘要
介绍了300MW汽轮机卧式主汽门工作原理与结构特性,对某厂#6机B侧高压主汽门关闭不严密的原因进行了分析,提出了解决处理方案,收到了良好效果,对解决同类型机组卧式主汽门关闭不严密具有重要的参考价值。
出处
《低碳世界》
2016年第19期76-77,共2页
Low Carbon World
二级参考文献14
-
1康建国,吴泳海.汽轮机组中压主汽门关闭不严的原因及处理[J].电力安全技术,2007,9(10):43-44. 被引量：4
-
2Mazur Z, Campos - Amezcua, R, Urquiza - Beltran, Garcia - Gutierrez,A. Numerical 3D simulation of the erosion due to solid particle impact in the main stop valve of a steam turbine [ J ]. Applied Thermal Engineering,2004,24(13) : 1877 -1891.
-
3Charles P, Bellanca PE, Diagnostic monitoring of solid particle erosion in steam turbines [ J ]. IEEE Transactions on Energy Conversion, 1988,3 (2) :249 - 253.
-
4Jarvis J M, Baker K I, Vieira A T. Effects of turbine stop valve characteristics on steam hammer loads in combined cycle power plants[J]. ASME Pressure Vessels and Piping Division (Publication) PVP,1999,395 : 75 -82.
-
5Reigl M, Dave HN. Considerations to the an - isothermal creep - fatigue assessment of steam turbine rotor steels[ A]. Proceedings of the ASME Vessels and Piping Conference 2007 [ C ]. San Antonio TX,2008,9 : 267 - 274.
-
6Ogata T. Void growth simulation of a steam turbine casing material under creep and creep - fatigue loading [ A ]. Proceedings of the ASME Vessels and Piping Conference 2007 [ C ]. San Antonio TX, 2008,9 : 493 -501.
-
7Fujiyama K, Saito T, Mori K, et al. Creep damage assessment through EBSD method and hardness measurement for a high chromium turbine rotor steel forging [ A ]. Proceedings of the ASME Vessels and Piping Conference 2007 [ C ]. San Antonio TX, 2008, 9 : 549 - 555.
-
8Rosario DA, Roberts BW, Tumbow MS, et al. Bull run fossil plant main steam piping creep evaluation[ A]. Proceedings of the ASME Power Conference 2007 [ C ]. San Antonio TX 2007 : 11 - 28.
-
9Koul AK,Bhanot S, Tiku A, et al. Importance of physics - based prognosis for improving turbine reliability - RRA 501KB gas turbine blade case study[ A]. Proceedings of the ASME Power Conference 2007 [ C ]. San Antonio TX,2007 : 185 - 190.
-
10瞿潇,陈峰.300MW汽轮机高压主汽门延迟关闭原因分析及处理[J].浙江电力,2007,26(5):25-26. 被引量：1
共引文献3
-
1游利国,焦明飞,胡千彬.汽轮机卧式主汽门泄漏与处理[J].电器工业,2011(12):63-65. 被引量：1
-
2范凯,高怡秋,张楠,张莹.主汽阀速关性能分析与试验研究[J].机电一体化,2012,18(7):20-22.
-
3魏应强,颜毅.卧式主汽阀阀碟与阀座密封型线运行损伤原因分析及处理[J].发电设备,2022,36(5):367-370.
-
1张钦璞,姚兴顺,李成玉,刘庆松.BD850喷油泵试验台的工作原理与结构[J].柴油机,1993,15(5):33-35.
-
2甄凯玉,陈志学,安宁.现代喷油器的原理与结构[J].矿山机械,1998,26(5):81-83.
-
3闻雪友.我与中国舰船燃气轮机之缘④舰船燃气轮机的原理与结构[J].舰船知识,2013(5):54-56.
-
4岳喜亮.BD850—D型试验台的电路原理与结构简单分析[J].山东内燃机,2003(2):45-46.
-
5方兴国,吴志祥.320MW机组主机中压主汽门漏汽处理及节能分析[J].节能,2010,29(12):49-51.
-
6李连生,郁永章.外燃式涡旋发动机理论分析与研究[J].西安交通大学学报,1994,28(8):89-93.
-
7孙根胜,余文明.柴油机高压共轨喷射系统控制技术研究[J].建设机械技术与管理,2004,17(2):64-68. 被引量：1
-
8刘广彬,李连生,阮并璐,赵远扬,束鹏程.水平管降膜蒸发器的研究进展[J].制冷与空调,2008,8(3):20-23. 被引量：8
-
9尹海龙.裂解气压缩机轴承的安装与调试[J].乙烯工业,2005,17(3):39-42. 被引量：4
-
10苏毅,张涛,张镇,林梅.漂浮式微型波力发电装置原理与结构[J].后勤工程学院学报,2013,29(3):79-82. 被引量：8
