期刊文献+

Growth Kinetics of Laves Phase and Its Effect on Creep Rupture Behavior in 9Cr Heat Resistant Steel 被引量:1

Growth Kinetics of Laves Phase and Its Effect on Creep Rupture Behavior in 9Cr Heat Resistant Steel
原文传递
导出
摘要 The effects of Laves phase formation and growth on creep rupture behaviors of P92 steel at 883 K were studied.The microstructural evolution was characterized using scanning electron microscopy and transmission electron microscopy.Kinetic modeling was carried out using the software DICTRA.The results indicated Fe_2(W,Mo)Laves phase has formed during creep with 200 MPa applied stress at 883 Kfor 243 h.The experimental results showed a good agreement with thermodynamic calculations.The plastic deformation of laths is the main reason of creep rupture under the applied stress beyond 160 MPa,whereas,creep voids initiated by coarser Laves phase play an effective role in creep rupture under the applied stress lower than 160 MPa.Laves phase particles with the mean size of 243 nm lead to the change of creep rupture feature.Microstructures at the vicinity of fracture surface,the gage portion and the threaded ends of creep rupture specimens were also observed,indicating that creep tensile stress enhances the coarsening of Laves phase. The effects of Laves phase formation and growth on creep rupture behaviors of P92 steel at 883 K were studied.The microstructural evolution was characterized using scanning electron microscopy and transmission electron microscopy.Kinetic modeling was carried out using the software DICTRA.The results indicated Fe_2(W,Mo)Laves phase has formed during creep with 200 MPa applied stress at 883 Kfor 243 h.The experimental results showed a good agreement with thermodynamic calculations.The plastic deformation of laths is the main reason of creep rupture under the applied stress beyond 160 MPa,whereas,creep voids initiated by coarser Laves phase play an effective role in creep rupture under the applied stress lower than 160 MPa.Laves phase particles with the mean size of 243 nm lead to the change of creep rupture feature.Microstructures at the vicinity of fracture surface,the gage portion and the threaded ends of creep rupture specimens were also observed,indicating that creep tensile stress enhances the coarsening of Laves phase.
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2016年第7期685-691,共7页
基金 Item Sponsored by National Natural Science Foundation of China(51201061,51475315) China Postdoctoral Science Foundation(2015M571804) Natural Science Foundation of Jiangsu Province of China(BK20150329)
关键词 heat resistant steel Laves phase microstructure plastic deformation creep rupture heat resistant steel Laves phase microstructure plastic deformation creep rupture
  • 相关文献

参考文献23

  • 1Z.X. Xia, C. Zhang, Z.D. Li, Z.G. Yang, S.J. Liu, J. Iron Steel Res. Int. 18 (2011) No. 9, 47-52.
  • 2Z. X. Xia, C. Zhang, N. Q. Fan, Y. F. Zhao, F. Xue, S. J. Liu, Mater. Sei. Eng. A 545 (2012) 91-96.
  • 3Z. X. Xia, C. Zhang, Z.G. Yang, J. Mater. Sci. 46 (2011) 3151- 3156.
  • 4Z. X. Xia, C. Zhang, Z. Q. Liu, Z.G. Yang, Mater, Lett. 65 (2011) 937-939.
  • 5O. Prat, J. Gareia, D. Rojas, C. Carrasco, G. Inden, Acta Ma- ter. 58 (2010) 6142-6153.
  • 6H. Cui, F. Sun, K. Chen, L. Zhang, R. Wan, A, Shan, J.S. Wu, Mater. Sei. Eng. A 527 (2010) 7505-7509.
  • 7A. Aghajani, F. Richter, C. Somsen, S. G. Fries, I. Steinbach, G. Eggeler, Seripta Mater. 61 (2009) 1068-1071.
  • 8A. Aghajani, Ch. Somsen, G. Eggeler, Aeta Mater. 57 (2009) 5093-5106.
  • 9Z.X. Xia, C.Y. Wang, Y.F. Zhao, G.D. Zhang, L. Zhang, X. M. Meng, Aeta Metall. Sin. 28 (2015) 1238-1246.
  • 10F. Abe, Metall. Mater. Trans. 36 (2005) 321-332.

同被引文献4

引证文献1

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部