期刊文献+

注塑机塑化工艺参数对塑化能耗的影响 被引量:3

Influence of Plasticizing Process Parameters of Injection Molding on the Energy Consumption
下载PDF
导出
摘要 通过对塑化理论与能量热平衡的分析,提出了塑化过程单产能耗计算公式,以全液压注塑机为研究对象,并借助Origin数据分析软件,讨论了螺杆转速、塑化背压以及机筒平均温度3个工艺参数对塑化能耗的影响。结果表明:塑化能耗随着螺杆转速、机筒平均温度的升高而降低,随着塑化背压的升高而升高。 The calculation formulas for unit consumption were given by analyzing the plasticizing theory and energy thermal balance of the plasticizing process. Relationship between the unit consumption and the processing conditions was discussed with a hydraulic injection molding machine, and the software Origin was employed. The results showed that the unit consumption was decreased with the increase of screw speed and temperature of barrel, while the influence of back pressure was on the contrary.
出处 《塑料》 CAS CSCD 北大核心 2016年第4期113-115,118,共4页 Plastics
关键词 塑化理论 单产能耗 螺杆转速 塑化背压 温度 plasticizing theory unit consumption screw speed back pressure temperature
  • 相关文献

参考文献12

二级参考文献21

  • 1吴大鸣.国内外节能塑料机械的研发与应用进展[J].塑料,2007,36(2):30-36. 被引量:10
  • 2王兴天.注射成型技术[M].北京:化学工业出版社,1989..
  • 3成都科技大学.塑料成型工艺学[M].北京:中国轻工业出版社,1993.293.
  • 4[1]Taguchi.实验设计方法[M].北京:机械工业出版社,1987.
  • 5[2]Tuncay Erzurumlu,Babur Ozcelik.Minimization of warpage and sink index in injection-molded thermoplastic parts using Taguchi optimization method[J].Materials and Design.2006,(27):853~861.
  • 6[5]Hasan Oktem.Application of Taguchi optimization technique in determining plastic injection molding process parameters for a thin-shell part[J].Materials and Design.2007,(28):1271~1278.
  • 7王兴天.注塑工艺与设备[M].北京:化学工业出版社,2009.
  • 8王敏.注塑机节能改造的趋向[J].塑料助剂,2007(4):54-55. 被引量:5
  • 9陈魁.试验设计与分析[M].2版.北京:清华大学出版社,2009.
  • 10Glanvill A B. The Plastics Engineer' s Data Book. Beijing: China Light Industry Press, 1983.

共引文献27

同被引文献18

引证文献3

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部