摘要
在基于钙钛矿/富勒烯平面异质结的钙钛矿太阳电池中,PEDOT:PSS是最常使用的空穴传输材料.但PEDOT:PSS呈酸性,会腐蚀金属氧化物透明电极,使器件的电极界面稳定性欠佳.本文将高功函的氧化钨(WOx)插入到PEDOT:PSS和FTO之间,形成WOx/PEDOT:PSS复合空穴传输层,这样既可以避免PEDOT:PSS与FTO直接接触,提高器件的稳定性,又可以进一步降低电极界面的接触势垒,从而提升器件的性能.作者研究了复合传输层对透光率、钙钛矿形貌、钙钛矿结晶、光伏性能及器件稳定性的影响.基于WOx/PEDOT:PSS复合空穴传输层的电池效率可以达到12.96%,比单纯的PEDOT:PSS的电池效率(10.56%)提升了22.7%,同时器件的稳定性也得到大幅改善.
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS) is a commonly used hole-transport material in the perovskite solar cells(Per SCs) structure of perovskite/fullerene planer heterojunction, but it also has a negative effect on the stability of device because of its acidity which will corrode metal oxide transparent electrodes. In this work, a WOxhole-transport layer with high work function was inserted into the PEDOT: PSS and FTO to enhance the stability and photovoltaic performance.The inserted WOxlayer not only can avoid direct contact between PEDOT:PSS and FTO, but also can further reduce the contact barrier between the electrode interface. We studied the effect of WOx/PEDOT:PSS double-layered hole transport layers on the optical transmittance, the morphology and crystals of perovskite, the photovoltaic performance and the stability of the devices. The power conversion efficiency(PCE) of Per SCs can be improved from 10.56%(with PEDOT:PSS layer) to 12.96% with WOx/PEDOT:PSS double-layered hole transport layers, and the stability of the device has also been greatly improved.
出处
《电化学》
CAS
CSCD
北大核心
2016年第4期382-389,共8页
Journal of Electrochemistry
基金
江苏省科技支撑项目(No.BE2014147-4)
北京市科技计划项目(No.Z141100003314003)资助
关键词
平面异质结
钙钛矿太阳电池
空穴传输层
氧化钨
稳定性
planar heterojunction
perovskite solar cells
hole transport layer
tungsten oxide
stability