期刊文献+

室内配水器给水系统配水均匀性研究 被引量:1

下载PDF
导出
摘要 通过模拟两卫一厨户型,考察了同时出水点个数及入户压力对传统枝状给水系统和3种配水器给水系统配水均匀性的影响。结果表明,随出水点个数的增加和入户压力逐渐降低,传统枝状给水系统的配水均匀性大幅度降低,而3种配水器给水系统的配水均匀性均保持稳定,可有效避免家庭用水过程中水量不稳定和热水器出水忽冷忽热的问题,这主要是由于配水器系统中分水器的出水点处于同一位置高度并在相同压力作用下,省去了一些局部阻力配件等。此外,在3种不同组合的配水器给水系统中,水力条件和配水均匀性优劣顺序依次为配水器1>配水器3>配水器2给水系统。
出处 《给水排水》 CSCD 北大核心 2016年第9期78-81,共4页 Water & Wastewater Engineering
基金 国家水体污染控制与治理科技重大专项(2014ZX07406-002)
  • 相关文献

参考文献4

二级参考文献16

  • 1朱正林,徐治皋,辛洪祥.T型三通性能优化[J].南京工程学院学报(自然科学版),2007,5(2):60-63. 被引量:3
  • 2陶氏化学公司.(Dow Plastics)资料[M].,..
  • 3[1]DBJ/CT 5111-2001,建筑给水铜管管道工程技术规程[S].
  • 4[2]DBJ/CT 508-2001,建筑给水聚丁烯(PB)管道工程技术规程[S].
  • 5Fletcher C A J.Computational Techniques for Fluid Dynamics,Vol 1:Fundamentals and General Techniques.2nd ed[M].Berlin:Springer-Verlag,1991.351.
  • 6DIN 16833. Polyethylene pipes of raised temperature resistance-General quality requirements.testing[S]. 2001 --06.
  • 7ISO 10508. Thermoplastics pipes and fittings for hot and cold water systems[S]. 1995.
  • 8ISO 4065. Thermoplastics pipes-Universal wall thickness table[S]. 1996.
  • 9DIN 4721. Plastic piping systems for warm water floor heating systems and radiator connecting-polyethylene of raised temperature resistance (PE-RT)[S]. 2001- 06.
  • 10DIN 16892. Crosslinked polyethylene (PE-X) pipes- General requirements, testing[S]. 2001 -- 07.

共引文献26

同被引文献6

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部