期刊文献+

Fe-Si-B合金中非金属夹杂物的热力学分析 被引量:4

Thermodynamic analysis of non-metallic inclusions in Fe-Si-B alloy
原文传递
导出
摘要 利用扫描电镜及能谱仪对Fe-Si-B合金中非金属夹杂物组成进行了分析,并研究了氧化物及硫化物夹杂在熔炼过程中的演变规律及其形成条件。研究结果表明:Fe-Si-B合金中夹杂物主要有Al、Si的氧化物,以及少量Ti、Mn的硫化物。经热力学计算,在1623K下,熔炼初期主要为Al的氧化过程,当熔体中[Al]的质量分数降低至0.002 2%后才发生Si的氧化;Ti及Mn的硫化物在1623K下不能形成,需熔体分别冷却至1550和1310K下才可形成。 The non-metallic inclusions in Fe-Si-B alloy was analyzed by SEM and EDS, and the evolution and form- ing condition of sulphides and oxides were investigated during smelting process. The results show that inclusions in Fe-Si-B alloy mainly include oxides with Al and Si, and sulphides with a small amount of Ti and Mn. Thermo- dynamic calculation indicates that Al is oxidized at the preliminary stage of smelting process. Si is oxidized when Al content declines to 0. 002 2 mass% at 1 623 K. Sulphides with Ti and Mn cannot be formed at 1 623 K; they are formed when the molten alloy was cooled to 1 550 K and 1 310 K respectively.
出处 《钢铁研究学报》 CAS CSCD 北大核心 2016年第9期50-53,共4页 Journal of Iron and Steel Research
关键词 Fe-Si-B合金 非金属夹杂物 热力学分析 Fe-Si-B alloy non-metallic inclusion thermodynamic analysis
  • 相关文献

参考文献9

二级参考文献37

共引文献15

同被引文献26

引证文献4

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部