摘要
基于刘桥一矿已完工注浆改造工作面底板成孔与注浆信息,在分析太原组灰岩岩性与岩溶发育特征的基础上,统计工作面底板太灰含水层出水量与注浆量,得出钻孔出水量与注浆量呈正相关关系。综合选取钻窝单孔最大出水量和单位体积注浆量两个指标,将太灰上段岩溶含水层岩溶结构划分为四种类型,并分析各结构类型在矿井内的分布状况,为进一步评价注浆效果和指导防治水工作提供基础。
Water yield and grouting quantity were obtained on the data of floor pore-forming and grouting of the working face where grouting reconstruction has finished in Liuqiao No. 1 Mine and on the analysis of Taiyuan formation limestone features and karst aquifer development features. The calculation obtains a positive correlation between the water yield and grouting quantity. The maximum water yield of a single pore and the grouting quantity of unit volume were selected to classify the karst aquifer into 4 types. The distribution of the different structure types could provide a basis for further evaluation of the grouting effect and water control.
出处
《山西煤炭》
2016年第5期8-11,15,共5页
Shanxi Coal
基金
安徽省高校自然科学基金(KJ2016SD19)
矿山地质灾害防治安徽省重点实验室项目(KJ2016A826)
关键词
太原组灰岩
岩溶含水层
空间结构类型
注浆改造
Taiyuan formation limestone
karst aquifer
spatial structure type
grouting reeonstruetion