摘要
利用声发射技术对45钢、GCr15钢和T12钢三种材料进行连续冷却条件下马氏体相变监测试验,并以相变声发射参量分布及波形特性为基础,分析了马氏体相变声发射信号的时频特性。结果表明,GCr15钢具有明显的等温马氏体相变特征,45钢、T12钢为变温马氏体特征,且片状马氏体声发射信号幅值与能量高于板条状马氏体,具有较宽的频率范围。
In this paper, the acoustic emission technology is used to perform the martensite phase change monitoring experiment under continuous cooling conditions for three kinds of materials, 45 steel, GCr15 steel and T12 steel, and to implement the time-frequency characteristic research based on acoustic emission parameter distribution and the waveform feature of the phase change. The results show that GCr15 steel has obvious phase transformation characteristics of isothermal martensite, 45 steel and T12 steel have the characteristics of variable temperature martensite, and the acoustic emission signal amplitude and energy in lamellar martensite are higher than those in plate strip martensite, and the signal in lamellar martensite has a wide range of frequencies.
出处
《无损检测》
2016年第8期22-25,共4页
Nondestructive Testing
基金
黑龙江省自然科学基金资助项目(E2016012)
关键词
马氏体相变
声发射
特征参量
频率特征
Martensite transformation
Acousticemission
Characteristic parameter
Frequency characteristic
