期刊文献+

Effects of Substrate Crystallographic Orientations on Microstructure in Laser Surface-Melted Single-Crystal Superalloy:Theoretical Analysis 被引量:3

Effects of Substrate Crystallographic Orientations on Microstructure in Laser Surface-Melted Single-Crystal Superalloy:Theoretical Analysis
原文传递
导出
摘要 A geometric analysis technique for crystal growth and microstructure development in single-crystal welds had been previously developed.And the effect of welding conditions on the tendency of stray grains formation during solidification was researched.In the present work,these analytical methods were further extended.Combined with an original vectorization method,a 3D Rosenthal solution was used to determine thermal conditions of the welds.Afterward,the dendrite growth orientation,the dendrite growth velocity and the thermal gradient along dendrite direction were calculated and lively plotted.Finally,the tendency of stray grains formation in the solidification front was forecasted and its distribution was presented with a 3D plot.The results indicate that substrate orientation has some impacts on the crystal growth pattern,dendrite growth velocity,distribution of thermal gradient and stray grain.Based on the research methods proposed in this work,any substrate crystallographic orientation can be studied,and predicted stray grains distribution can be visualized. A geometric analysis technique for crystal growth and microstructure development in single-crystal welds had been previously developed.And the effect of welding conditions on the tendency of stray grains formation during solidification was researched.In the present work,these analytical methods were further extended.Combined with an original vectorization method,a 3D Rosenthal solution was used to determine thermal conditions of the welds.Afterward,the dendrite growth orientation,the dendrite growth velocity and the thermal gradient along dendrite direction were calculated and lively plotted.Finally,the tendency of stray grains formation in the solidification front was forecasted and its distribution was presented with a 3D plot.The results indicate that substrate orientation has some impacts on the crystal growth pattern,dendrite growth velocity,distribution of thermal gradient and stray grain.Based on the research methods proposed in this work,any substrate crystallographic orientation can be studied,and predicted stray grains distribution can be visualized.
出处 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2016年第8期763-773,共11页 金属学报(英文版)
基金 financially supported by the National Natural Science Foundation of China(Nos.51401210 and51271186) the National High Technology Research and Development Program of China(No.2014AA041701)
关键词 Single crystal Laser surface remelting Weld repair Modeling Stray grains distribution Single crystal Laser surface remelting Weld repair Modeling Stray grains distribution
  • 相关文献

参考文献29

  • 1Z.D. Fan, D. Wang, L.H. Lou, Acta Metall. Sin. (Engl. Lett.) 28, 152 (2015).
  • 2Z.X. Shi, S.Z. Liu, J.R. Li, Acta Metall. Sin. (Engl. Lett.) 28, 1278 (2015).
  • 3M. Gaumann, S. Henry, F. Cleton, J.D. Wagniere, W. Kurz, Mater. Sci. Eng., A 271, 232 (1999).
  • 4J.D. Hunt, Mater. Sci. Eng. 65, 75 (1984).
  • 5M. Gaumann, R. Trivedi, W. Kurz, Mater. Sci. Eng., A 226, 763 (1997).
  • 6M. Rappaz, S.A. David, J.M. Vitek, L.A. Boatner, Metall. Trans. A 20, 1125 (1989).
  • 7S.A. David, J.M. Vitek, M. Rappaz, L.A. Boatner, Metall. Trans. A 21, 1753 (1990).
  • 8M. Rappaz, S.A. David, J.M. Vitek, L.A. Boatner, Metall. Trans. A 21, 1767 (1990).
  • 9W.P. Liu, J.N. DuPont, Acta Mater. 52, 4833 (2004).
  • 10W.P. Liu, J.N. DuPont, Acta Mater. 53, 1545 (2005).

同被引文献31

引证文献3

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部