摘要
介绍消防气瓶干燥处理常用方法,IG541组分含量一致性控制的必要性。介绍压力法、称量法+压力法充装IG541灭火剂的原理。分三个批次进行试验,对比压力法、称量法+压力法充装的IG541灭火剂的组分含量偏差和压力差发现:压力法充装IG541灭火剂效率较高,但是一致性较差;称量法+压力法充装IG541不仅效率高,而且一致性好。
The drying treatment methods of gas cylinder of IG541 gas fire extinguishing system and the necessity of consistency control on its component were introduced. The principle of pressure method and weighing plus pressure method in filling of IG541 extinguishing agent was explained. Experiments with three batches were carried out to research the difference of component content and the pressure by pressure method and weighing plus pressure method. The results showed that the pressure method for filling the IG541 extinguishing agent had high efficiency and low consistency, but the weighing plus pressure method had high efficiency and high consistency.
出处
《消防科学与技术》
CAS
北大核心
2016年第9期1288-1291,共4页
Fire Science and Technology
基金
国家标准修订项目(20150426-Q-312)
关键词
气体灭火系统
IG541灭火剂
水分含量
组分含量
压力法
称量法
gas fire extinguishing system
IG541 extinguishing agent
moisture content
component content
pressure method
weighing method