摘要
结合某厂板坯连铸机的实际情况,采用射钉法对生产的Q345和模具钢连铸坯进行凝固规律计算,计算结果与现有的连铸专家系统计算相互验证。根据连铸专家系统计算,计算得到板坯轻压下的位置。板坯经轻压下之后,连铸坯内部质量明显改善。
出处
《现代冶金》
CAS
2016年第4期6-8,共3页
Modern Metallurgy
参考文献3
-
1王朝盈,刘彩玲,刘光辉.厚板坯连铸轻压下技术和轻压下扇形段[J].重型机械,1999(5):9-11. 被引量：3
-
2阎朝红,徐国栋.3^#宽厚板坯连铸机凝固末端轻压下技术[J].宝钢技术,2008,1(4):63-67. 被引量：4
-
3Suzuki K, Takahashi K. Mechanical properties of the slabbing mill roll materials at room and elevated tem- peratures[J]. Trans. Iron and Steel Institute of Japan, 1975, 61(3): 371--387.
二级参考文献9
-
1Kuyng Shik Oh. Development of Soft Reduction For The Bloom Caster At Pohang Works of Posco[ C ]. In:The Steelmaking Division of the Iron and Steel Society ed. Steelmaking Conference Proceedings, Nashville, 1995:301 - 308.
-
2Chiang L K. Application of Soft Reduction Technique for Improving Centerline segregation in Continuously Cast Slab [ C ]. In:The Steelmaking Division of the Iron and Steel Society ed. Steelmaking Conference Proceedings, Chicago, 1989:81 - 89.
-
3OkimoriM NishiharaR FukunagaS etal.Development of soft reduction teehniques for preventing center porosity occurreneein large size bloom.铁と钢,1994,80(8):120-123.
-
4Masaoka T, Mizuoka S, Kobayashi H, et al. Improvement of Centertine Segregation in Continuously Cast Slab With SoftReduction Technique[ C ]. In : The Steelmaking Division of the Iron and Steel Society ed. Steelmaking Conference Proceedings, Chicago, 1989:63 - 69.
-
5Manfred M Wolf. Defination and Control of Strand Soft Reduction[ J]. CAMP - ISIJ, 1998, ( 11 ) :787.
-
6Raihle C M , Sivesson P, Tukiainen M, et al. Improving inner quality in continuously cast billets comparison between mould electromagnetic stirring and thermal soft reduction [ J ]. Ironmaking and Steelmaking, 1994,21 (6) :487 -495.
-
7Sakaki G S, Kwong A T, Petozzi J J. Soft reduction of continuously -cast blooms at Stelco's Hilton Works[ C]. In :The Steelmaking Division of the Iron and Steel Society ed. Steelmaking Conference Proceedings, Nashville, 1995 : 295 - 300.
-
8Tadao Watanabe, Mikio Yamashita. Influence of liquid flow at the final solidifacation stage on centerline segregation in continuously cast slab [ J ]. Sumitomo Metals, 1993,45 ( 3 ) :26 - 39.
-
9三中章裕,木村和成,人见康雄,等.Improvemenl of center segregation and center porosity in continuously cast blooms and billet [ J ]. CAMP - ISIJ, 1994, ( 7 ) : 186 - 189.
共引文献5
-
1陈志平,李洪泉,张荣品.板坯连铸轻压下工艺评述[J].梅山科技,2004(3):1-5.
-
2胡晓红,于铭杰,陈永生,胡增跃,石磊.动态轻压下技术在连铸中的应用[J].连铸,2010,35(6):8-11. 被引量：7
-
3许庆太,李吉东,孙中强.枝晶腐蚀低倍检验在连铸生产中的应用[J].物理测试,2011,29(6):22-27. 被引量：9
-
4马建超,桂仲林,苏笃星,夏奇,夏翁伟,王志福.Q345B厚板坯连铸轻压下工艺的优化[J].钢铁,2012,47(4):38-41. 被引量：7
-
5郭鹏,丁寅,陈刚,赫忠华.X70管线钢铸坯轻压下控制模式的工艺优化[J].新疆钢铁,2019,0(3):35-37.
引证文献2
-
1周从锐,李源源,韦耀环,宾利文.射钉法测量坯壳厚度的实践[J].柳钢科技,2017,0(6):17-18. 被引量：1
-
2周从锐,李源源,韦耀环,梁龙清.射钉法测量坯壳厚度在板坯连铸机上的应用[J].冶金信息导刊,2018,55(5):37-39.
-
1甄新刚,朱志远,蒋海涛,李景光,王玉龙,白占禄,赵晶,孙博.动态轻压下位置对400mm特厚板坯中心偏析的影响[J].炼钢,2012,28(2):20-23. 被引量：4
-
2张玉宝,和光磊,韩淑华.连铸动态轻压下位置的研究[J].中国重型装备,2008(3):1-3. 被引量：2
-
3谢海唯,朱苗勇,宋景欣,程乃良.连铸方坯凝固末端轻压下位置的预报研究[J].材料与冶金学报,2003,2(3):185-188. 被引量：8
-
4张松,杨彦宏.连铸方坯动态轻压下位置[J].辽宁科技大学学报,2010,33(2):132-135.
-
5Е.Ф.利特维年科,В.И.扶夫库恩,С.Д.科楚尔,А.Г.科瓦连科,А.А.谢纳托罗夫,先越蓉,石春华.转炉冶炼控制系统[J].重钢技术,2005,48(1):30-32.
-
6王宝峰,丁国,麻永林,孟志泉,李春龙,王玉昌,王权.大方坯在连铸过程中传热及凝固规律的数学模拟[J].炼钢,2002,18(5):15-18. 被引量：15
-
7陈光友,倪红卫,张华,罗传清,刘光明.武钢板坯连铸凝固规律的研究[J].武汉科技大学学报,2008,31(6):605-608. 被引量：7
-
8成日金,王志衡,王洪富,夏金魁,曹龙琼,张华.Q345钢250mm×2000mm板坯连铸凝固规律及工艺优化[J].特殊钢,2013,34(2):41-44. 被引量：4
-
9成艳芹,郭曙强.不锈钢母液预脱硅的热力学问题[J].上海金属,2005,27(4):15-18. 被引量：2
-
10徐伟卓,张静.管线钢凝固过程偏析疏松的研究[J].南钢科技与管理,2015,0(2):1-6.
