期刊文献+

Research on One-Piece Structure Target Flow Sensing Technology Based on Fiber Bragg Grating 被引量:2

Research on One-Piece Structure Target Flow Sensing Technology Based on Fiber Bragg Grating
原文传递
导出
摘要 In view of problems existing in the detection of the traditional hydraulic system, such as the large volume of sensor and the low measurement accuracy, a new one-piece target type flow sensor is designed and researched based on fiber Bragg grating (FBG). A compact structure is designed, which is convenient to be dismantled, processed, and installed, based on the analysis of the principle of FBG and the structure of target type flow sensor. The force of target put in fluid flow is turned into the FBG wavelength drift, with a corresponding relationship. The problem on the cross sensitivities of the temperature and strain is solved effectively by using double FBG symmetrically pasted on the both surfaces of the cantilever. The impact on the fluid state is analyzed through simulation in the software FLUENT, and the results show that the impact was smaller than that of the traditional structure. The results of experiments in the hydraulic system show that there is a good linear relationship between the change in the dual FBG central wavelength and mass loading on the target sheet has a good linear relationship, and the sensitivity is twice that of a single FBG sensitivity. In view of problems existing in the detection of the traditional hydraulic system, such as the large volume of sensor and the low measurement accuracy, a new one-piece target type flow sensor is designed and researched based on fiber Bragg grating (FBG). A compact structure is designed, which is convenient to be dismantled, processed, and installed, based on the analysis of the principle of FBG and the structure of target type flow sensor. The force of target put in fluid flow is turned into the FBG wavelength drift, with a corresponding relationship. The problem on the cross sensitivities of the temperature and strain is solved effectively by using double FBG symmetrically pasted on the both surfaces of the cantilever. The impact on the fluid state is analyzed through simulation in the software FLUENT, and the results show that the impact was smaller than that of the traditional structure. The results of experiments in the hydraulic system show that there is a good linear relationship between the change in the dual FBG central wavelength and mass loading on the target sheet has a good linear relationship, and the sensitivity is twice that of a single FBG sensitivity.
机构地区 Department Two
出处 《Photonic Sensors》 SCIE EI CAS CSCD 2016年第4期303-311,共9页 光子传感器(英文版)
基金 This work was supported by the National Natural Science Foundation of China (No. 41404022) and the Shanxi National Science Foundation (No.2015JM4128).
关键词 Fiber Bragg grating flow sensor target type structure equal intensity cantilever beam Fiber Bragg grating flow sensor target type structure equal intensity cantilever beam
  • 相关文献

同被引文献19

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部