期刊文献+

振动外场对LLDPE/UHMWPE纤维共混体系结晶行为的影响

Effect of Vibration Field on Crystallization Behavior of LLDPE/UHMWPE Fiber Blends
原文传递
导出
摘要 主要研究了在不同温度下,振动外场对线型低密度聚乙烯(LLDPE)/超高分子量聚乙烯(UHMWPE)纤维共混体系结晶行为的影响。扫描电镜(SEM)分析结果表明,在125℃或150℃下施加振动后,LLDPE/UHMWPE纤维共混体系都形成了串晶结构,而升高温度不利于串晶结构的形成。差示扫描量热分析(DSC)的结果也表明,施加振动后共混体系出现了特殊晶体。广角X射线衍射分析(WAXD)的结果表明,施加振动后共混体系的取向度得到了提高。力学性能测试结果表明,施加振动后共混体系的拉伸强度有所提升。 The impacts of vibration field at different temperatures on the crystallization behavior of linear low density polyethylene(LLDPE)/ultra high molecular weight polyethylene(UHMWPE) fiber blends were mainly investigated. The scanning electron microscopy(SEM) results show that the LLDPE/UHMWPE fiber blends have formed shish-kebab structure since the vibration has been applied at 125℃ and 150℃, and raising the temperature is not conducive to the formation of shish-kebab structure. The differential scanning calorimetry(DSC) results show that the blends appear special crystal after applying vibration. The wide-angle X-ray diffraction(WAXD) results show that the orientation of the blends has been improved after applying vibration. The mechanical property testing show that tensile strength of the blends has been improved to some extent after applying vibration.
作者 李晓光 杨丽岩 付顺成 吴萍萍 杨其 Li Xiaoguang Yang Liyan Fu Shuncheng Wu Pingping Yang Qi(State Key Laboratory of Polymer Materials Engineering of China, College of Polymer Science and Engineering, Sichuan University,Chengdu 610065,China)
出处 《塑料科技》 CAS 北大核心 2016年第10期25-28,共4页 Plastics Science and Technology
基金 高分子材料工程国家重点实验室自主课题经费资助(sklpme2014-2-08)
关键词 振动 线型低密度聚乙烯 超高分子量聚乙烯纤维 共混体系 串晶 力学性能 Vibration LLDPE UHMWPE fiber Blends Shish-kebab Mechanical properties
  • 相关文献

参考文献11

  • 1Ogino Y,Fukushima H,Matsuba G,et al.Effects of high molecular weight component on crystallization of polyethylene under shear flow[J].Polymer,2006,47(15):5 669-5 677.
  • 2Liang S,Yang H,Wang K,et al.Unique crystal morphology and tensile properties o f injection-molded bar of LLDPE by adding HDPE with different molecular weights[J].Acta Materialia,2008,56(1):50-59.
  • 3Fukushiam H,Ogino Y,Matsuba G,et al.Crystallization of polyethylene under shear flow as studied by time resolved depolarized light scattering:Effects of shear rate and shear strain[J].Polymer,2005,46(6):1 878-1 885.
  • 4Yang L,Somani R H,Sics I,et al.Shear-induced crystallization precursor studies in model polyethylene blends by in-situ Rheo-SAXS and Rheo-WAXD[J].Macromolecules,2004,37(13):4 845-4 859.
  • 5Zuo F,Keum J K,Yang L,et al.Thermal stability of shearinduced shish-kebab precursor structure from high molecular weight polyethylene chains[J].Macromolecules,2006,39(6):2 209-2 218.
  • 6Liang S,Yang H,Wang K,et al.Unique crystal morphology and tensile properties of injection-molded bar of LLDPE by adding HDPE with different molecular weights[J].Acta Materialia,2008,56(1):50-59.
  • 7Hobbs J K,Humphris A D L,Miles M J.In-situ atomic force microscopy of polyethylene crystallization.1.Crystallization from an oriented backbone[J].Macromolecules,2001,34(16):5 508-5 519.
  • 8Na B,Zhang Q,Fu Q,et al.Viscous-force-dominated tensile deformation behavior of oriented polyethylene[J].Macromolecules,2006,39(7):2 584-2 591.
  • 9Matsuba G,Sakamoto S,Ogino Y,et al.Crystallization of polyethylene blends under shear flow:Effects of crystallization temperature and ultra high molecular weight component[J].Macromolecules,2007,40(20):7 270-7 275.
  • 10Ning N Y,Luo F,Fu Q,et al.Observation of shearinduced hybrid shish kebab in the injection molded bars of linear polyethylene containing inorganic whiskers[J].Macromolecules,2007,40:8 533-8 536.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部