晶体外圆多刀切割机的设计

The Design of Crystal External Circular Multiple Cutting Machine

用外圆单刀切割机切割质地坚硬的晶体材料比较耗时,因此,在外圆单刀切割机的基础上设计一款多刀切割机,主要由底部支架、电机、皮带传动机构、切割刀片、位置调节器、卡槽和冷却装置等组成。用此设备可以一次将大块晶体材料切割成多块不同尺寸的晶体材料,不仅大大减少了切割时间,而且还可以通过调节刀片之间的距离来控制切割尺寸。

Using the external circular single-pole cutting machine only can cut a piece of crystal material at a time,single-pole outer circle cutting machine,therefore,on the basis of design a knife cutting machine,mainly from the bottom of the bracket,motor,belt transport device,cutting blade,positioners,card slot and cooling device,etc.So cutting a large volume crystal material with the equipment will take a longer time.Based on the external circular single-pole cutting machine,we will design an external circular multiple cutting machine which can cut the crystal material into many pieces with the same time.We cut crystal materials with the external circular multiple cutting machines not only the cutting time will be greatly reduced,but also the cutting size can be controlled by adjusting the distance of the blades.