期刊文献+

型钢阻尼器在双肢摇摆墙结构中的作用研究 被引量:1

Application Research of Profile Steel Dampers in Rocking Coupled Wall Structure
原文传递
导出
摘要 本文对菱形开孔H型钢阻尼器进行研究,通过ABAQUS有限元软件进行数值模拟分析,验证了此种阻尼器具有良好的滞回性能;对某12层框架结构、框架-双肢摇摆墙混凝土连梁结构和框架-双肢摇摆墙菱形开孔H型钢阻尼器结构进行动力时程分析,通过不同工况的分析结果表明,菱形开孔H型钢阻尼器加入双肢摇摆墙结构中,达到了双肢摇摆墙结构对阻尼器小震屈服、中震耗能、大震更换的要求;平均了结构层间位移角,减小了结构层间加速度、结构顶点位移,使双肢摇摆墙结构具有更加良好的抗震性能。 In this paper,the diamond hole H-beam damper is studied. Through numerical simulation analysis with ABAQUS finite element software,the well-performed hysteretic properties of the damper are verified. Dynamic time history analysis is perpectively used on a 12 layer frame structure,rocking coupled wall with concrete beam structure and rocking coupled wall with diamond hole H-steel structure. The results of different working conditions show that the diamond hole H-beam damper in rocking coupled wall structure achieves the requirement of rocking coupled wall structure 's damper: frequent earthquake yield,basic earthquake dissipation,strong earthquake change; the diamond hole H-beam damper averages interlayer displacement angle,reduces the structure interlayer acceleration,top displacement of structure,and make rocking coupled wall structure to have better seismic performance.
出处 《建筑科学》 CSCD 北大核心 2016年第9期108-113,共6页 Building Science
基金 河北省科技厅科研项目(13275401D)
关键词 型钢阻尼器 动力时程分析 双肢摇摆墙结构 profile steel damper dynamic time history analysis rocking coupled wall structure
  • 相关文献

参考文献6

二级参考文献29

  • 1董永涛,张耀春.建筑用钢循环塑性本构模型[J].哈尔滨建筑工程学院学报,1993,26(5):106-112. 被引量:17
  • 2周云,刘季.加劲阻尼装置在建筑抗震中的应用[J].工程抗震,1997(1):34-38. 被引量:10
  • 3HOUSNER G W, BERGMAN L A, CAVGHEY T K. Structure control : past, present and future [ J ]. Journal of Engineering Mechanics, 1997, 17(3):278-284.
  • 4MARIONI A, SILVESTRI A, UBALDINI M. Development and application of innovative energy dissipation systems in the EC countries [ C ]//International Post - Smirt Conference Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control of Seismic Vibration of Structures, Taormina, 1997:25 -27.
  • 5WHITTAKER A S, BERTERO V V,THOMPSON C L, et al. Seismic testing of steel plate energy dissipation devices[J]. Earthquake Spectra, 1991,7(4) : 563 -604.
  • 6TSAI K C, CHEN H W, HONG C P, et al. Design of steel triangular plate energy absorbersfor seismic -resistant construcfions[J]. Earthquake Spectra,1993, 9(3):505 -528.
  • 7苏晴茂,锺佩璋.台湾钢构造建筑技术之发展[C]//第三届结构与大地工程研讨会,台湾:[s.n.],2003:332-333.
  • 8TSAI K C, LI J W. Welded steel triangular plate device for seismic energy dissipation [ C ]//Proceedings of ATC - 17 - 1 Seminar on Seismic Isolation, Passive Energy Dissipation, and Active Control, Vol. 2, San Francisso: Appied Technology Council, 1993 : 11 - 12.
  • 9GB50011-2010建筑抗震设计规范[S].北京:中国建筑工业出版社,2010.
  • 10国家自然科学基金委员会.学科发展战略研究报告-建筑、环境与土木工程Ⅱ[R].北京:科学出版社,2006.

共引文献1934

同被引文献4

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部