摘要
针对当前天然橡胶干燥生产自动化程度低的问题,以橡胶初加工自动化生产线为背景,设计了基于可编程序控制器(PLC)的橡胶干燥生产卸胶工序的电气自动控制系统。根据卸胶工序的工艺控制流程设计了电气元件布置图,给出了多工作方式的编程思想,基于三菱PLC设计了其外部接线图、I/O地址分配、PLC顺序功能图等。仿真实验证明该电气控制系统运行平稳,很好地满足了干燥生产卸胶工艺的自动控制要求。该设计方案自动化程度高,可以在实际天然橡胶干燥生产中推广使用。
According to the problem of low-degree automation for natural rubber drying-production at present, and by the background of the primary processing for rubber produced line, the electrical auto-control system of discharge process for rubber drying-production was designed based on programmable logic controller (PLC). The diagrams of electrical components layout was designed according to discharge process for rubber drying-production, and the working design schemes of multi-working mode were given. The design scheme of control circuits were designed in detail based on Mitsubishi PLC, which include external connection diagram, input and output address allocation, sequence function chart (SFC) of PLC, etc. The operation of electrical control system was smoothly, and the electrical control system satisfied the requirement of production process. The conclusion is presented that the design of electrical control-system is high automatic, and it can be used in the practical production of natural rubber.
出处
《轻工机械》
CAS
2016年第5期48-52,共5页
Light Industry Machinery
基金
海南省产学研一体化专项资金项目(cxy20150018)
海南大学科研启动项目(kyqd1538)
关键词
天然橡胶
橡胶干燥
PLC
顺序控制
natural rubber
rubber drying
programmable logic controller(PLC)
sequence control