摘要
普通的倍压Boost PFC变换器因具有输入电流连续、电磁干扰小等优点而作为半桥逆变器的前端得到广泛运用,但其拓扑的开关管和电感在工频周期内未得到充分利用.本文针对普通倍压Boost PFC变换器的缺点提出一种改进型倍压Boost PFC变换器,同时引入混合导通模式控制算法控制此新型变换器,有效地降低了输入电流的畸变率(THDi),使系统在全功率范围内均能得到一个较好的PFC效果.最后搭建1k W的改进型倍压Boost PFC试验样机,并在该平台上验证了混合导通模式控制算法的可行性.
Because of the continuous input current and small electromagnetic interference, conventional voltage doubler Boost PFC converter has been widely applied in the front-end stage of half-bridge inverter. But this conventional converter is not taking full advantage of its switches and inductances. A modified voltage doubler Boost PFC is presented in this paper aiming to make up the shortfall. Besides, the Mixed Conduction Mode Algorithm is adopted to improve the quality of the input current of the novel converter, and a good result is obtained during the full power range. Finally, a 1KW experimental prototype is set up to verify the feasibility of the MCM Algorithm.
作者
许培德
XU Pei-de(Fuzhou University, fuzhou 350108, China Fujian College of Water Conservancy and Electrical Power, Yong＇an 366000, China)
出处
《湖南理工学院学报（自然科学版）》
CAS
2016年第3期31-34,共4页
Journal of Hunan Institute of Science and Technology(Natural Sciences)
关键词
功率因数校正
混合导通模式
倍压型
power factor correction
mixed conduction mode
voltage doubler
