期刊文献+

强电场中的脉冲束流强度测量方法

Measurement of beam currents downstream from strong electric field
下载PDF
导出
摘要 针对强电场中电场渗透的问题,采用特殊的法拉第筒法测量脉冲束流强度:在法拉第筒入口处用栅网屏蔽强电场,并用在收集板上加正压的方式抑制二次电子。采用解析计算和数值模拟方式对栅网的形状进行了选择,在同样的栅网丝宽和透过率的前提下,通过正六边形栅网的渗透电场最弱,因此选择正六边形栅网。将设计的法拉第筒用于一台真空弧离子源的束流强度测量,获得了该离子源的束流强度波形,其峰值流强约为550mA;利用测量结果计算了混合离子束在Cu收集板上的二次电子发射系数,约为2.0。 A Faraday cup used for measuring the beam currents downstream from strong electric fields was designed.The strong electric field was screened by agrid.The electrons were prohibited by the positive voltage on the collector.The shape of the grid was equilateral hexagon distributed because of its lowest saturation electric field at the same grid widths and the same grid transmission rates.The beam current of a vacuum arc ion source was measured by the designed beam current measuring device and the peak value of the beam current was about 550 mA.The secondary electron yield of the Cu collector bombarded by the hybrid ion beams was calculated to be 2.0.
出处 《强激光与粒子束》 EI CAS CSCD 北大核心 2016年第11期154-157,共4页 High Power Laser and Particle Beams
基金 国家自然科学基金项目(11575162)
关键词 强电场 束流强度 法拉第筒 栅网 二次电子 strong electric field pulsed ion beam current Faraday cup grid secondary electron
  • 相关文献

参考文献3

二级参考文献37

  • 1郭之虞,徐蓉,明建川,邹宇斌,高淑丽,赵捷,彭士香,吴文忠,钱锋,宋执中,于金祥,袁忠喜,于茂林.Measurement Techniques of High-Current Ion Beam Emittance[J].Chinese Physics C,2008,32(z1):148-150. 被引量:3
  • 2吴先映,张孝吉,李强,张胜基,张荟星,刘安东.MEVVA离子源凸形引出电极的研制[J].核技术,2006,29(2):93-96. 被引量:1
  • 3蔡启舟,王栋,骆海贺,魏伯康.镁合金微弧氧化膜的SiO_2溶胶封孔处理研究[J].特种铸造及有色合金,2006,26(10):612-614. 被引量:19
  • 4王天石,何劼,夏乐洋,陈科璞,吾提库尔,温潇,杜建成.镁合金微弧氧化膜有机封孔耐腐蚀性能的研究[J].表面技术,2006,35(6):8-10. 被引量:15
  • 5MAJUMDAR J D,CHANDRA B R,GALUN R,MORDIKE B,MANNA I.Laser composite surfacing of a magnesium alloy with silicon carbide[J].Composites Science and Technology,2003,63(6):771-778.
  • 6HUO Hong-wei,LI Ying,WANG Fu-hui.Corrosion of AZ91D magnesium alloy with a chemical conversion coating and electroless nickel layer[J].Corrosion Science,2004,46(6):1467-1477.
  • 7GRAY J E,LUAN B.Protective coatings on magnesium and its alloys—A critical review[J].Journal of Alloys and Compounds,2002,336(1/2):88-113.
  • 8FUKUDA H,MATSUMOTO Y.Effects of Na2SiO3 on anodization of Mg-Al-Zn alloy in 3 M KOH solution[J].Corrosion Science,2004,46(9):2135-2142.
  • 9GUO Hong-fei,AN Mao-zhong,XU Shen,HUO Hui-bin.Microarc oxidation of corrosion resistant ceramic coating on a magnesium alloy[J].Materials Letters,2006,60(12):1538-1541.
  • 10YEROKHIN A L,NIE X,LEYLAND A,MATTHEWS A,DOWEY S J.Plasma electrolysis for surface engineering[J].Surface&Coatings Technology,1999,122(2/3):73-93.

共引文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部