摘要
利用ANSYSWORKBENCH对单把盘形滚刀破碎岩石的过程进行分析仿真。对盘形滚刀的破岩机理进行分析,由于岩石为脆性材料,几乎不存在弹性变形,当逐渐增加滚刀的破切力,引起岩石的损伤积累,当岩石完全损伤时突然发生破碎。得到此时加载在单把滚刀上的垂直力,这对多把滚刀的布置,计算掘进机对刀盘所需提供的推力有一定的指导意义。
To put a single disc cutter breakage process of rock is simulated. The rock breaking mechanism of disc cutter is analyzed, due to the rock is a brittle material, there is almost no elastic deformation, while gradually increasing hob broken shear, causing accumulation of rock damage. When the rock when completely damaged suddenly broken by workbench. This loading on the hob on vertical force, the arrangement of a plurality of the hob calculated TBM cutter to provide thrust has certain directive significance.
出处
《湖南城市学院学报(自然科学版)》
CAS
2016年第6期7-8,共2页
Journal of Hunan City University:Natural Science
基金
安徽省高校省级质量工程专业综合改革试点项目(项目编号:2014zy120)
安徽省高校省级质量工程特色专业项目(项目编号:20101657)
关键词
盘形滚刀
破岩
有限元
数值仿真
Disc cutter
Rock breaking
Finite element method
Numerical simulation