摘要
A duplex treatment of plasma Zr-alloying and plasma nitriding was used to improve the tribological properties of Ti-6Al-4V. The microstructure of the Zr-N composite（alloyed） layer formed on Ti-6Al-4V and its hardness, friction and wear properties were investigated by using OM, SEM, GDOES, EDS, microhardness tester as well as ball-on-disk tribometer. The results of microstructural analysis show that the alloyed layer is compact and uniform and is mainly composed of ZrN, TiN_（0.3） and AlN. A very tiny adhesive and slight oxidation wear is the primary wear mechanism for the modified Ti-6Al-4V. The tribological property is improved significantly after the duplex treatment. The good combination of antifriction and wear resistance for modified Ti-6Al-4V is mainly attributed to the higher surface hardness of metal nitrides formed on the surface and enhanced supporting of the Zr-diffusing layer.
A duplex treatment of plasma Zr-alloying and plasma nitriding was used to improve the tribological properties of Ti-6Al-4V. The microstructure of the Zr-N composite（alloyed） layer formed on Ti-6Al-4V and its hardness, friction and wear properties were investigated by using OM, SEM, GDOES, EDS, microhardness tester as well as ball-on-disk tribometer. The results of microstructural analysis show that the alloyed layer is compact and uniform and is mainly composed of ZrN, TiN_（0.3） and AlN. A very tiny adhesive and slight oxidation wear is the primary wear mechanism for the modified Ti-6Al-4V. The tribological property is improved significantly after the duplex treatment. The good combination of antifriction and wear resistance for modified Ti-6Al-4V is mainly attributed to the higher surface hardness of metal nitrides formed on the surface and enhanced supporting of the Zr-diffusing layer.
基金
Funded by the National Natural Science Foundation of China(Nos.51474154,51401141,51501125)
the Provincial Natural Science Foundation of Shanxi(Nos.2014011015-7,2014021017-3)
