期刊文献+

RAP温度对泡沫沥青冷再生混合料性能的影响 被引量:6

下载PDF
导出
摘要 回收沥青路面材料(RAP)的温度受季节和一天当中空气温度的影响,既有泡沫沥青冷再生混合料配合比设计方法并没有考虑RAP温度对泡沫沥青冷再生混合料性能的影响。该文研究了RAP温度对泡沫沥青冷再生混合料干湿劈裂强度、高低温性能和泡沫沥青分散性状的影响。结果表明:RAP温度对泡沫沥青冷再生混合料劈裂强度有显著的影响,随着RAP温度增加,泡沫沥青冷再生混合料干湿劈裂强度增大,最佳泡沫沥青用量减小;增加RAP温度可显著改善泡沫沥青冷再生混合料的高低温性能,不同RAP预热温度下,泡沫沥青冷再生混合料马歇尔试件劈裂破坏界面的泡沫沥青面积百分比与试件干湿劈裂强度之间线性拟合关系良好,RAP预热温度对泡沫沥青冷再生混合料的影响机理在于其影响了泡沫沥青在混合料中的分散形状和分散的均匀性,提高了混合料的压实特性。
作者 史艺红
出处 《中外公路》 北大核心 2016年第5期288-293,共6页 Journal of China & Foreign Highway
  • 相关文献

参考文献9

  • 1JTGF41—2008沥青路面再生技术规范[S].
  • 2王宏,郝培文,张航.乳化沥青冷再生拌和用水量和水泥掺加方式研究[J].公路,2013,58(9):245-250. 被引量:25
  • 3徐建,黄颂昌,邹桂莲.高等级公路沥青路面再生技术[M].北京:人民交通出版社,2011.
  • 4王宏,刘锋,余建荣,张葆永.乳化沥青冷再生混合料养生方式研究[J].武汉理工大学学报(交通科学与工程版),2015,39(3):641-646. 被引量:32
  • 5王宏,刘锋,张葆永.不同养生温度乳化沥青冷再生混合料空隙分布特征[J].武汉理工大学学报(交通科学与工程版),2015,39(2):388-392. 被引量:41
  • 6Kim, Y. , Lee, H. , and Heitzman, M. Dynamic Modu- lus Andrepeated Load Tests of Cold In-Place Recycling Mixtures Using Foamedasphalt[J]. J. Mater. Civ. Eng., 2009,21 (6), 279- 285.
  • 7Malliek, R. B. , Bradley, J. E. , and Bradbury, R. L. E- valuation of Heated Reclaimed Asphalt Pavement Materi- al and Wax-Modified Asphaltfor Use in Recycled Hot- Mix Asphalt [R]. Transportation Research Record1998, Transportation Research Board, Washington, D. C., 2007:112-122.
  • 8Kim, Y. , and Lee, H. Development of Mix Design Pro- cedure Forcold In-Place Recycling with Foamed Asphalt [J].J. Mater. Civ. Eng., 2006,18(1):116-124.
  • 9Jenkins, K. J., Groot, L. A., Ven, M. F. C., and Molenaar. Half- Warm Foamed Bitumen Treatment, A New Process. Proc. , 7th Conf. on Asphalt Pavements for Southern Africa, South Africa, 1999.

二级参考文献19

  • 1JTGF41-2008公路沥青路面再生技术规范[S].北京:人民交通出版社,2008.
  • 2中华人民共和国交通运输部.JTGF41-2008公路沥青路面再生技术规范[S].北京:人民交通出版社,2008.
  • 3徐剑,黄颂昌,邹桂莲.高等级公路沥青路面再生技术[M].北京:人民交通出版社,2010.
  • 4National Center for Asphalt Technology (NCAT), Participants Reference Book. Pavement Recycling Guidelines for State and Local Governments[R]. U. S. Department of Transportation, Federal Highway Administration, Publication No. FHWA) SA) 98) 042, 1997.
  • 5RAMANUJAM J M,JONES J D. Characterization of foamed-bitumen stabilisation[J]. Int J Pavement Eng 2007,8(2) : 111-22.
  • 6IENKINS K J,LONG F M,EBELS L J. Foamed bitu- men mixes: shear performance? [J].International Journal of Pavement Engineeing, 2007,8 (2) : 85-98.
  • 7KUMAR C K,DSNV K R,REDDY M A,et al. In- vestigation of cold in-place recycled mixes in India [J]. Int J Pavement Eng,2008,9(4) : 265-74.
  • 8YAN J, NI F, YANG M, et al. An experimental study on fatigue properties ofemulsion and foam cold recy- cled mixes [J]. Construction Build Mater, 2010, 24 (11) :2151-6.
  • 9KIM Y,LEE H D. Development of mix design proce- dure for cold in-placerecycling with foamed asphalt[J]. J Mater Civ Eng, 2006,18(1) :116-24.
  • 10KEKWICK S V. PRACTICE B. Bitumen emulsion and foamed bitumen materialslaboratory processing [C]. Proceedings of the 24th Southern African Transportconference, SATC, South Africa, 2005, IS- BN No. 1-920-01712-7.

共引文献59

同被引文献44

引证文献6

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部