根据湿度进行智能浇花的硬件设计

According To the Hardware Design of Intelligent Humidity Watering

设计以STC12C5A60S2单片机为主控芯片,通过对应的I/O口和相应的模块电路进行工作。先检测湿度,然后与自设的湿度进行对比,当检测的湿度低于自设的湿度时就浇水,使得湿度达到设定值。在水箱中放置水位检测装置,水位过低时提醒对水箱进行加水,以保证智能浇花器的工作。

The design is based on STC12C5A60S2 microcontroller as the main control chip, through the corresponding I/O port and the corresponding module circuit to work. First detect the humidity,and then compared with the humidity of the self,when the humidity is lower than the humidity of the humidity when the water,so that the humidity to reach the set value. Water level detecting device is placed in a water tank,when the water level is too low remind the tank for water,to ensure intelligent watering device.