期刊文献+

酯类基础油热氧化机理研究 被引量:7

STUDY ON THERMAL OXIDATION MECHANISM OF ESTER BASE OIL
下载PDF
导出
摘要 选用新戊二醇二庚酸酯作为模型化合物,模拟酯类航空基础油高温条件下的热氧化、分解、聚合等过程。通过分子模拟计算模型化合物分子的各个键能,检测其氧化、裂解、聚合产物的组分,油品酸值、黏度等物化性能的变化,分析其氧化机理,对研究酯类润滑油的热氧化机理提供基础数据。 The neopentyt glycol diheptanoate was used as a model compound to simulate the thermal oxidation, decomposition and polymerization process of ester aviation base oil at high temperature. Mo- lecular simulation was used to calculate the molecular bond energy of the model compound. Based on the results of oxidation, pyrolysis, polymerization, and the changes of acid value and viscosity, the oxidation mechanism of the model compound was proposed to provide the basic data for the study of the thermal oxidation mechanism of ester lubricating oil.
出处 《石油炼制与化工》 CAS CSCD 北大核心 2016年第11期88-93,共6页 Petroleum Processing and Petrochemicals
关键词 航空润滑油 液相结焦 酯类基础油 高温氧化 分子模拟 aviation lubricating oil liquid coking ester base oil high temperature oxidation molecular simulation
  • 相关文献

参考文献6

  • 1郑发正,徐新,白雪亮.润滑油的氧化与对策[J].合成润滑材料,2008,35(4):30-32. 被引量:11
  • 2杨睿,杜斌,张志凌,谢续明,安武昭典,嬉野絢子.润滑油结焦行为的实验室评价[J].石油学报(石油加工),2013,29(5):813-817. 被引量:9
  • 3Siouris S, Shepherd T, Wilson C, et al. Development of an ap- paratus for the degradation o{ aviation gas turbine lubricants [J]. Tribology Transactions, 2013,56(2) : 215-223.
  • 4Mousavi P, Wang D, Grant C S, et al. Measuring thermal deg- radation of a polyol ester lubricant in liquid phase[J]. Indus- trial Engineering Chemistry Research,2005,44(15) :5455- 5464.
  • 5Lashkhi V L, Shor G I. A colloid-chemical model for the tendency of oils to form high-temperature deposits[J]. Chem- istry and Technology of Fuels and Oils, 1992,28(5) :260-263.
  • 6Kauffman R E, Feng A, Karasek K R. Coke formation from aircraft turbine engine oils: Part I--deposit analysis and de- velopment of laboratory oil coking test[J]. Tribology trans- actions,2000,43(4) :823-829.

二级参考文献14

  • 1WANG J C. Deposit formation tendencies of lubricants at high temperatures [J]. Lubrication Engineering, 1994, 51(5)~ 413-419.
  • 2ASTM D6186-2008, Standard test method for oxidation induction time of lubricating oils by pressure differential scanning calorimetry (PDSC)[S].
  • 3GB439-1990,航空喷气机润滑油[s].
  • 4ASTM D5704-2007, Standard test method for evaluation of the thermal and oxidative stability of lubricating oils used for manual transmissions and final drive axles[S].
  • 5ASTM D4636-2009, Standard test method for corrosiveness and oxidation stability of hydraulic oils, aircraft turbine engine lubricants, and other highly refined oilsES~.
  • 6JIS K2514-1996, Imbricating oils-Determination of oxidation stability[S].
  • 7LEE C J. KLAUS E E, DUDA J L. Evaluation of mineral oil and synthetic base stocks using the Penn State microoxidation test [J]. American Chemical Society, Division of Petroleum Chemistry, Preprints, 1992, 37(4): 1354-1355.
  • 8PALEKAR V, DUDA J L, KLAUS E E, et al. Evaluation of high-temperature liquid lubricants using the Penn State microoxidation test [J ]. Lubrication Engineering, 1996, 52(4): 327-334.
  • 9PEREZ J M, PEI P, ZHANG Y, et al. Diesel Deposit Forming Tendencies. Microanalysis Methods[M]. SAE Technical Paper Series, 1991.
  • 10KAUFFMAN R E, FENG A, KARASEK K R. Coke formation from aircraft turbine engine oils Part I Deposit analysis and development of laboratory oil coking test [J]. Tribology Transactions, 2000, 43(4): 823-829.

共引文献18

同被引文献51

引证文献7

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部