陆地长输管道自动焊自动超声检测可靠性评价研究被引量：3

Research on Ultrasonic Testing Reliability Evaluation for Land long-distance Pipeline with Automatic Welding Joints

下载PDF

导出

摘要通过开展陆地长输管道自动焊AUT技术的可靠性评价研究工作,建立了一套完整的AUT广义可靠性理论及评价体系。通过缺陷样本容量的建立与优化计算,开展AUT工艺评定及可靠性分析工作,结合AUT、RT、切片的检测结果,定量论证了AUT技术在全自动焊接质量验收环节方面的可靠性及先进性,为国内陆地长输管道的自动焊+自动超声检测一体化施工提供技术支撑。 A set of general reliability theory and evaluation system for automatic ultrasonic testing（AUT） is founded through the research on ultrasonic testing reliability evaluation for land long- distance pipeline with automatic welding joints.By means of establishment and optimization calculation of defect sample size,AUT process evaluation and reliability analysis,as well as testing results from AUT,RT and slices,the reliability and advancement of AUT technology in automatic welding quality inspection are quantitatively verified,which will provide technical support for domestic land long- distance pipelines in automatic welding ＋ AUT integral construction.

作者胡艳华王玉雷周剑琴金作良牛虎理李春润

机构地区中国石油集团工程技术研究院中国石油集团海洋工程重点实验室中国石油管道建设项目经理部

出处《石油工程建设》 2016年第5期85-89,共5页 Petroleum Engineering Construction

关键词陆地长输管道自动焊自动超声检测(AUT) 可靠性 land long-distance pipeline automatic welding automatic ultrasonic testing（AUT） reliability

分类号 TE973 [石油与天然气工程—石油机械设备]

引文网络
相关文献

参考文献9

1G EO RG IOU G A. Probability of Detection ( POD ) Curves Derivation, Application and Limitations:Health and Safety Executive[R]. London, 2006.
2张双楠,庞笑,杨宏宇,朱子东,罗旭.油气管道维修中搭接焊缝超声B扫描检测方法与设备[J].石油工程建设,2015,41(3):35-38. 被引量：5
3Visser Consultancy Limited. POD/POS Curves for Non- destructive Examination=Health and Safety Executive [R]. London, 2000.
4FUCSKF,MULLERC,SCHARMACH M. Measuring of the Reliability of NDE [C] // 8th International Conference of the Slovenian Society for Non-Destructive Testing,Portoroz, Slovenia, 2005:173-180.
5FOR SYTHDS, FAHRA, LEEMANS D V, et al. "Development of POD from in-service NDI data~ Review of Progress in Quantitative Non-destructive Evaluation IM]. V01.19B. New York.2000:2 167-2 174.
6NATH S K, BALASUBRAMANIAM K, KRISHNAMURTHY C V, et al. Reliability Analysis of Time off Light Diffraction Characterization of Inclined Cracks [J]. Material Evaluation, 2009,67( 3 ):342-353.
7李广波.全自动超声波检测应用于西部管道施工[J].油气田地面工程,2010,29(8):92-93. 被引量：4
8李熏莹.相控阵超声检测可靠性与POD数值模拟初探[D].大连:大连理工大学,2014.
9冯振宇,李振兴.基于可靠性的裂纹检出概率曲线测定方法[J].无损检测,2010,32(4):249-252. 被引量：11

二级参考文献15

1傅惠民,钱若力.无损检测可靠性与寿命控制方法[J].航空动力学报,1994,9(3):227-232. 被引量：15
2刘秀丽,左富纯,黄华斌.磁粉检测表面裂纹概率曲线的测定[J].无损检测,1996,18(6):168-168. 被引量：2
3Lewis W H. A review of nondestructive inspection reliability on aircraft structure[C]//Proc 12th symposium NDE,[s. l.].[s. n.],1979:24--26.
4刘秀丽,王俊安,陈莉.飞机结构多处损伤检测技术研究[C]//第十四届全国结构工程学术会议.烟台:烟台大学,2005.
5Harlow D G, Wei R P. Probabilities of occurrence and detection of damage in airframe materials[J]. Fatigue & Fracture of Engineering Materials and Structures, 1999,22(5) : 427-436.
6Song X, Sarkar P, Veronesi W. Virtual inspection: optimum sample size for POD experiment[J]. Quality Engineering, 2002,14 (4) : 623- 644.
7Safizadeh M S, Forsyth D S, Fahr A. The effect of flaw size distribution on the estimation of POD[J]. Insight, 2004,46(6) : 355--359.
8林富甲黄玉珊.裂纹检测概率曲线的统计测定.航空学报,1982,9(3):227-232.
9Q/SYGD0192—2009,油气钢制管道管体缺陷修复规范[S].
10刘秀丽,黄华斌.涡流法对不同厚度隔层下裂纹检出概率的测试研究[J].航空学报,1998,19(4):489-492. 被引量：5