摘要
为了提高电动汽车的剩余续驶里程估算精度,在工况识别基础上,提出了一种将模糊能耗与卡尔曼滤波相结合的剩余续驶里程估算模型。建立了整车能耗模型;在MATLAB/Simulink下建立特征参数与能耗之间的模糊规则库;基于卡尔曼滤波对输出剩余续驶里程进行优化。优化结果表明:采用该方法的行驶里程实际值与期望值平均误差为2.11%,相比传统平均能耗法,其剩余续驶里程估算精度提高了77%。
In order to improve the estimation accuracy of electric vehicle driving range,a new model of surplus driving range estimation by combining fuzzy energy consumption and Kalman filter was proposed based on condition identification. Firstly,vehicle energy consumption model was established. Then the fuzzy rule library about the characteristic parameters and energy consumption was established with the MATLAB / Simulink.Finally,the output of surplus driving range was optimized based on the Kalman filter. The experimental results show that by using this method the average error of actual mileage value to expectation is 2. 11%. The estimation accuracy of surplus driving range is improved by 77% compared with the traditional average energy consumption method.
出处
《河南科技大学学报(自然科学版)》
CAS
北大核心
2017年第1期28-33,5,共6页
Journal of Henan University of Science And Technology:Natural Science
基金
国家自然科学基金项目(51105178
51475213)
江苏省自然科学基金项目(BK2011489)
江苏省"六大人才高峰"基金项目(2013-XNY-002)
关键词
电动汽车
剩余续驶里程估算
模糊能耗
卡尔曼滤波
electric vehicles
surplus driving range estimation
fuzzy energy consumption
Kalman filter