进口双针床经编机成圈机理分析

An Analysis on the Loop Forming Mechanism of Two-needle Bar Warp-knitting Machine Introdced from Abroad

文中对RD6DPLM/ 12 - 3型双针床经编机的成圈运动曲线及成圈机构分别与DG5 0 6DPLM型和RD6DPLM/ 12型经编机进行了比较 ,认为RD6DPLM/ 12 - 3型经编机与DG5 0 6DPLM型经编机相比 ,其机构设计合理 ,可更好地满足工艺要求 ,且提高了车速、增强了机器的使用寿命。RD6DPLM/ 12 - 3型经编机与RD6DPLM/ 12型经编机相比 ,编织适应性较强 ,其脱圈针槽板隔距可调至 2 .

A comparison is made on the loop forming movement curve and loop formation system of two needle bar warp knitting machine RD6DPLM/12 3 with that of Model DG506DPLM and RD6DPLM/12 warp knitting machines respectively.Compared to DG506DPLM,it is considered, the RD6DPLM/12 3 has a rational design in construction, higher speed and lasting machine life, it can satisfy the technological requirements still more. While comparing to RD6DPLM/12, a better adaptability has been offered and the gauge of knock over trick plate can be adjusted to 2.0mm below.