期刊文献+

脉冲功率源用高耦合度储能电感研究 被引量:3

Research on high coupling energy storage inductance used for pulse power supply
下载PDF
导出
摘要 在电感储能型脉冲功率源中耦合电感是关键。首先从STRETCH Meat grinder电路出发,阐明了高耦合度电感的概念,然后通过分析影响耦合度的关键因素给出了高耦合度储能电感的模型,并对耦合电感的电感量和磁场的计算进行了数学推导。为了进一步的了解耦合电感的磁场分布情况,本文对其进行了有限元仿真,得到了耦合电感的磁感应强度分布云图和能量分布云图,考虑到漏磁的存在,在文章的最后还对耦合电感的漏磁进行了仿真计算。通过本文的研究能够为脉冲功率源用高耦合度储能电感的优化设计提供一定的理论依据。 Coupling inductance is a key factor in inductive storage pulse power supply.Starting from STRETCH Meat grinder circuits,the concept of high coupling inductance is described first in this paper,then high coupling energy storage inductance models are given by analyzing key factors influencing coupling degree,and mathematical derivation is carried out for inductance value and magnetic field calculation of coupling inductance.In order to further understand magnetic field distribution of coupling inductance,finite element simulation is performed against it,and magnetic induction intensity distribution map and energy distribution map of coupling inductance are obtained.In consideration of flux leakage,simulating calculation is conducted for flux leakage of coupling inductance in the end part of this paper.Research work in this paper provides certain theoretical basis for optimization design of the high coupling storage inductance used for pulse power supply.
作者 张超 董健年 张军 Zhang Chao Dong Jiannian Zhang Jun(School of Energy and Power Engineering,Nanjing University of Science and Technology,Nanjing 210094,China)
出处 《电子测量技术》 2016年第10期21-25,共5页 Electronic Measurement Technology
关键词 脉冲功率源 耦合电感 有限元仿真 磁场 pulse power supply coupling inductor finite element simulation magnetic field
  • 相关文献

参考文献5

二级参考文献28

  • 1王建华,张方华,龚春英,杨宁.开关变换器两端口网络建模、分析及设计[J].电子测量与仪器学报,2009,23(S1):212-218. 被引量:4
  • 2姚丽姜,姚中,虞维扬.降低FeSiAl磁粉芯损耗方法研究[J].上海钢研,2005(3):55-57. 被引量:23
  • 3董健年,吴毅,桂应春,张军.电磁弹射装置中线圈受力与电流相位的关系[J].高电压技术,2006,32(7):79-80. 被引量:11
  • 4Lindner K, Long J, Girogi D, et al. A Meatgrinder cir- cuit for energizing resistive and varying inductive loads (Era Guns) [ J]. IEEE Transactions on Magnetics, 1986, 22(6) : 1591-1596.
  • 5Sitzman A, Surls D, Mallick J. Design, construction, and testing of an inductive pulsed-power supply for a small railgun [ J]. IEEE Transactions on Magnetics, 2007, 43( 1 ) : 270-274.
  • 6Dedie P, Brornmer V, Scharnholz S. ICCOS countercur- rent-thyristor high-power opening switch for currents up to 28 kA [ J]. IEEE Transactions on Magnetics, 2009, 45 ( 1 ) : 536-539.
  • 7Dedie P, Brommer V, Scharnholz S. Experimental reali- zation of an eight-stage XRAM generator based on ICCOS semiconductor opening switches, fed by a magnetodynamic storage system [ J ]. IEEE Transactions on Magnetics, 2009, 45(1): 266-271.
  • 8Dedie P, Brommer V, Scharnholz S. Twenty-stage toroid- al XRAM generator switched by countercurrent thyristors [J]. IEEE Transactions on Plasma Science, 2011, 39 ( 1 ) : 263-267.
  • 9Dierks E, McNab I R, Mallick J A, et al. Battery-induc- tor parametric system analysis for electromagnetic guns [J]. IEEE Transactions on Plasma Science, 2011, 39 ( 1 ) : 268-274.
  • 10HARRY D F. Electromagnetic launch science and technology in the united states enters a new era[J]. IEEE Transactions on Magnetics,2005,33(1) :158-164.

共引文献16

同被引文献30

引证文献3

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部