期刊文献+

变幅载荷作用下缺口试件的疲劳寿命预测方法 被引量:3

A NEW METHOD TO ESTIMATE FINITE LIFE OF NOTCHED COMPONENTS UNDER VARIABLE AMPLITUDE FATIGUE LOADING
下载PDF
导出
摘要 基于单轴疲劳的研究成果,从疲劳机理出发,研究一种基于应变能密度与强度的干涉模型,将反复加载的应变能耗散等效为内应力的增长,建立内应力与外加应力和材料本征强度的关系,由此导出多轴疲劳寿命分析公式,然后考虑缺口处应力梯度的影响,研究缺口试样多轴加载疲劳寿命公式,并用三个不同应力集中系数的缺口试样的实验数据验证所研究模型的正确性。研究表明,该模型对包含缺口构件受多轴变幅载荷作用下的寿命有很好的预测能力。 Based on uniaxial fatigue research, starting from the fatigue mechanism, a strain energy density and strength interference model based on the strain cyclic loading has been studied. The energy dissipation is equivalent to the stress growth. The relation of internal stress applied stress and the intrinsic strength has been established, Then consider the effect of notch stress gradient, make a research on the notched specimens of muhiaxial loading fatigue life formula and the stress concentration factor with three different samples of experimental data to verify the correctness of the model under study. Preliminary research indicates that the model have a satisfied prediction ability for the referenced muhiaxial fatigue test data.
作者 张伟 胡明敏
出处 《机械强度》 CAS CSCD 北大核心 2016年第6期1325-1329,共5页 Journal of Mechanical Strength
关键词 多轴疲劳 高周疲劳 缺口件 寿命预测 Multiaxial fatigue High-cycle fatigue Notch Fatigue life prediction
  • 相关文献

参考文献2

二级参考文献16

  • 1徐灏.疲劳强度[M].北京:高等教育出版社,1990..
  • 2Zheng Yang. Stress and strain concentration factors for tension bars of circular cross-section with semicircular groove [ J ]. Engineering Fracture Mechanics, 2009, 76: 1683-1690.
  • 3Jiang Y P, Guo W L, Shao X J. On the study of the effects of notch shape on the creep damage under cyclic loading [ J ]. International Journal of Fatigue, 2007, 29 : 836-842.
  • 4Savadis A, Savadis G, Zhang C. Elastic-pledastic FE analysis of a notched shaft under muhiaxial nonproportional synchronous cyclic loading [J]. Theoretical and Applied Fracture Mechanics, 2001, 36 ( 2 ) : 87-97.
  • 5Socie D F, Marquis G B. Muhiaxial Fatiuge [ M ]. United States of America: Society of Automotive Engineers, Inc, 1999: 342-345.
  • 6Papadupouls IV, Davolip, Filippini M, Bernasconi A. A comparative study of multiaxial high-cycle fatigue criteria for metals. [J]. lnt J Fatigue, 1997; 19(3) :219-35.
  • 7Zenner H,Simbtlrger A,Liu J. on the fatigue limit of ductile metals under complex multiaxial loading [ J ]. Int J Fatigue, 2000 (22) : 137-145.
  • 8Goncalves CA,Aratajo JA, Mamiya EN. Muhiaxial fatigue: a stress based criterion for hard metals[ J]. Int J Fatigue, 2005, 27: 177- 87.
  • 9Aleksander Karolcznk and Euald Macha. A review of critical plane orientations in muhiaxial failure criteria of mettallic materials [ J]. Int J Fracture, 2005, (134) :267-304.
  • 10Niels Saabye ottosen, Robert Stenstrtim, Matti Ristinmaa. Continuum approach to high-cycle fatigue modeling [ J ]. Int J Fatigue, 2008, 30: 996-1006.

共引文献4

同被引文献23

引证文献3

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部