期刊文献+

Duplexer Design for Full-Duplex Based Wireless Communications

Duplexer Design for Full-Duplex Based Wireless Communications
全文增补中
导出
摘要 The full-duplex(FD) based wireless communication devices,which are capable of concurrently transmitting and receiving signals with a single frequency band,suffer from a severe self-interference(SI) due to the large power difference between the devices' own transmission and the useful signal comes from the remote transmitters. To enable the practical FD devices to be implementable,the SI power must be sufficiently suppressed to the level of background noise power,making the received signal-to-interference-plus-noise ratio(SINR) satisfy the decoding requirement. In this paper,the design and implementation of the duplexer for facilitating SI cancellation in FD based wireless communications are investigated,with a new type of duplexer(i.e. an improved directional coupler) designed for improving the spatial suppression of the SI power. Furthermore,the practical circuit boards are designed and verified for the proposed prototype,showing that the spatial suppression capability may be up to 36 d B(i.e. much higher than that attainable in the commonly designed ferrite circulator) by using the proposed design. The full-duplex(FD) based wireless communication devices,which are capable of concurrently transmitting and receiving signals with a single frequency band,suffer from a severe self-interference(SI) due to the large power difference between the devices' own transmission and the useful signal comes from the remote transmitters. To enable the practical FD devices to be implementable,the SI power must be sufficiently suppressed to the level of background noise power,making the received signal-to-interference-plus-noise ratio(SINR) satisfy the decoding requirement. In this paper,the design and implementation of the duplexer for facilitating SI cancellation in FD based wireless communications are investigated,with a new type of duplexer(i.e. an improved directional coupler) designed for improving the spatial suppression of the SI power. Furthermore,the practical circuit boards are designed and verified for the proposed prototype,showing that the spatial suppression capability may be up to 36 d B(i.e. much higher than that attainable in the commonly designed ferrite circulator) by using the proposed design.
出处 《China Communications》 SCIE CSCD 2016年第11期1-13,共13页 中国通信(英文版)
基金 supported by the key project of the National Natural Science Foundation of China(No.61431001) the 5G research program of China Mobile Research Institute (No.[2015] 0615) Key Laboratory of Cognitive Radio and Information Processing,Ministry of Education(Guilin University of Electronic Technology) the Foundation of Beijing Engineering and Technology Center for Convergence Networks and Ubiquitous Services
关键词 full-duplex wireless communications Self-interference cancellation DUPLEXER Directional coupler 无线通信设备 双工器 全双工 设计 信号干扰噪声比 噪声功率 接收信号 SINR
  • 相关文献

参考文献1

二级参考文献4

共引文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部