期刊文献+

Design and experimental performance verification of a thermal property test-bed for lunar drilling exploration 被引量:3

Design and experimental performance verification of a thermal property test-bed for lunar drilling exploration
原文传递
导出
摘要 Chinese Chang'e lunar exploration project aims to collect and return subsurface lunar soil samples at a minimum penetration depth of 2 m in 2017. However, in contrast to those on the Earth, automated drilling and sampling missions on the Moon raise the risk of burning bits. Test-beds are required for testing the thermal properties of drill tools in a lunar environment. In this paper, a novel temperature measuring method based on thermocouples and a slip ring was proposed. Furthermore, a data acquisition system for a drilling process was designed. A vacuous, cryogenic, and anhydrous soil environment simulating the lunar surface was established. A drilling test-bed that can reach a depth of 2.2 m was developed. A control strategy based on online monitoring signals was proposed to improve the drilling performance. Vacuum and non-vacuum experiments were performed to test the temperature rising effect on drill tools. When compared with the non-vacuum experiment, the vacuum temperature rise resulted in a 12 ℃ increase. These experimental results provide significant support for Chinese lunar exploration missions. Chinese Chang'e lunar exploration project aims to collect and return subsurface lunar soil samples at a minimum penetration depth of 2 m in 2017. However, in contrast to those on the Earth, automated drilling and sampling missions on the Moon raise the risk of burning bits. Test-beds are required for testing the thermal properties of drill tools in a lunar environment. In this paper, a novel temperature measuring method based on thermocouples and a slip ring was proposed. Furthermore, a data acquisition system for a drilling process was designed. A vacuous, cryogenic, and anhydrous soil environment simulating the lunar surface was established. A drilling test-bed that can reach a depth of 2.2 m was developed. A control strategy based on online monitoring signals was proposed to improve the drilling performance. Vacuum and non-vacuum experiments were performed to test the temperature rising effect on drill tools. When compared with the non-vacuum experiment, the vacuum temperature rise resulted in a 12 ℃ increase. These experimental results provide significant support for Chinese lunar exploration missions.
出处 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2016年第5期1455-1468,共14页 中国航空学报(英文版)
基金 supported by the China Academy of Space Technology (CAST)
关键词 Drilling test bed Lunar drill Lunar environment simulator Temperature measurement Thermal property Drilling test bed Lunar drill Lunar environment simulator Temperature measurement Thermal property
  • 相关文献

参考文献4

二级参考文献46

  • 1郑永春,欧阳自远,王世杰,邹永廖.月壤的物理和机械性质[J].矿物岩石,2004,24(4):14-19. 被引量:104
  • 2杨晓刚.螺旋钻进钻屑运移规律及临界转速的研究[J].中国矿业大学学报,1994,23(4):101-108. 被引量:12
  • 3徐伟彪,赵海斌.小行星深空探测的科学意义和展望[J].地球科学进展,2005,20(11):1183-1190. 被引量:44
  • 4Backes P,Khatib O,Diaz-Calderon A,et al.Concept for coring from a low-mass rover[C].Aerospace Conference 2006 IEEE.
  • 5Bar-Cohen Y,Sherrit S,Bao X,et al.Ultrasonic/sonic sampler and sensor platform for in-situ planetary exploration[C].Proceedings of the 2003 IEEE.International Conference on MEMS,NANO and Smart Systems,2003:22-31.
  • 6Kubota T,Nakatani I,Watanahe K,et al.Study on mole-typed deep driller robot for subsudace exploration[C].Proceedings of the 2005 IEEE.International Conference on Robotics and Automation.Barcelona,Spain,April 2005:1297-1302.
  • 7Potthast C,Twiefel J,Wallaschek J.Modelling approaches for an ultrasonic percussion drill[J].Journal of Sound and Vibration,2007,308(3-5):405-417.
  • 8Hill J L,Shenhar J,Lombardo M.Tethered,Down-hole-motor drilling system-A benefit to MARS exploration[J].Advances in Space Research,2003,31(11):2421-2426.
  • 9Gan Y,Ellery A,Jaddou M,et al.Deployable wood wasp drill for planetary subsurface sampling[C].Aerospace Conference 2006IEEE.
  • 10DING Xi-lun,CRISTINA P,ALBERTO R.Novel robot for safety protection identification & detect[C].Proceedings of the 2007 IEEE.International Workshop on Safety,Security and Rescue Robotics.Rome,Italy,September 2007.

共引文献57

同被引文献17

引证文献3

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部