期刊文献+

200L规模废树脂微波桶内干燥装置设计验证 被引量:8

Design Verification of a 200L Microwave In-drum Drying Device for Spent Resin
下载PDF
导出
摘要 通过前期试验和资料的分析,结合微波电场分布与实测温场分布对比结果,利用Ansoft HFSS软件进行了200 L规模微波桶内干燥装置的设计。并利用200 L规模微波桶内干燥装置开展试验研究,研究表明,HFSS软件的模拟结果可以指导实际设计工作。 Based on preliminary tests and data analysis, combined with the measured temperature and electric field distribution, a 200 L microwave in-drum drying device for spent resin was designed using Ansoft HFSS. Pilot studies indicate that HFSS simulation results can guide practical design work.
出处 《辐射防护通讯》 2016年第4期23-26,共4页 Radiation Protection Bulletin
基金 中核集团预研基金项目:废树脂微波碳化 灰化工艺及关键参数研究
关键词 放射性废树脂 桶内干燥 微波 Spent resin In-drum drying Microwave
  • 引文网络
  • 相关文献

参考文献3

二级参考文献11

  • 1GB-14569.1-××低、中水平放射性废物固化体性能要求-水泥固化体[s].
  • 2EJ-914,低、中水平放射性固体废物混凝土容器[S].
  • 3IAEA. Innovative Waste Treatment and Conditioning Technologies at Nuclear IAEA-TECDOC- 1504. IAEA, 30-31 Power Plants Vienna, Max 2006.
  • 4Process and filling adapter for the in drum drying of liquid radioactive waste. US Patent 5566727, October 22, 1996.
  • 5Olaf oldiges, Hans-Jiirgen Blenski. A New Small Drying Facility for Wet Radioactive Waste and Liquids. WM'03 Conference, February 23-27, 2003, Tucson, Arizona.
  • 6Dejan Skanata, Vladislav Kroselj, Milan Jankovie. Krko NPP Radioactive Waste Characteristics. Proceedings of the International Conference Nuclear Energy for New Europe, Portoroz, Slovenia, Sept. 10-13, 2007.
  • 7T. L. White. Heat Transfer Enhanced Microwave Process for Stabilization of Liquid Radioactive Waste Slurry. Final Report for Crada ORNL-93-0190, March, 1995.
  • 8MOLLER M., WALTA R.Microwave In Drying-Effective Evaporation of Radioactive Waste Drum Liquid.
  • 9Christian Giessmann. Microwave In-Drum Drying. Radwaste Solutions, Jan/Feb., 2007:21-24.
  • 10R.L. Schulz,a G.G. Wicks,b D.C. Folz and D.E. Clarkc Overview of Hybrid Microwave Technology[J] Journal of the South Carolina Academy of Science 2011, 9(1) 25.

共引文献40

同被引文献94

引证文献8

二级引证文献8

;
使用帮助 返回顶部